References - Computational Analysis and Design of Bridge Structures - page 587

Chapter 16
American Petroleum Institute. Recommended Practice for Planning, Designing, and Con-
structing Fixed Offshore Platforms - Working Stress Design. Report RP 2A-WSD,
20th Ed., 1993.
Arockiasamy, M., Butrieng, N., and Sivakumar, M., “State-of-the-Art of Integral Abutment
Bridges: Design and Practice,” Journal of Bridge Engineering , 9(5), 497-506, 2004.
Barker, R.M., Duncan, J.M., Rojiani, K.B., Ooi, P.S.K., Tan, C.K., and Kim, S.G.,
Eds., “Manuals for Design of Bridge Foundations,” National Cooperative
Highway Research Program (NCHRP) Report 343, Transportation Research
Board, Washington, DC, 1991.
FHWA, Steel Bridge Design Handbook: Substructure Design, Publication
No. FHWA-IF-12-052, Vol. 16, Washington, DC, November, 2012, http://
www.fhwa.dot.gov/bridge/steel/pubs/if12052/volume16.pdf.
Greimann, L.F. “Rational Design Approach for Integral Abutment Bridge Piles,” Trans-
portation Research Record 1223, National Research Council, Washington, DC, 1989.
Greimann, L.F., and Wolde-Tinsae, A.M., “Design Model for Pile in Jointless
Bridges,” Journal of Structural Engineering , 114(6), 1354-1371, 1988.
Khodair, Y. and Hassiotis, S. “Numerical and Experimental Analyses of an Integral
Bridge,” International Journal of Advanced Structural Engineering , 2013,
http://www.advancedstructeng.com/content/5/1/14.
Rasmi, J., “Thermo-Mechanical Fatigue of Steel Piles in Integral Abutment Bridges,”
PhD Dissertation, Civil and Environmental Engineering, University of
Maryland, College Park, MD, 2012.
Shah, B.R., “3D Finite Element Analysis of Integral Abutment Bridges Subjected to
Thermal Loading,” M.S. Thesis, Kansas State University, Manhattan, KS, 2007.
Sisman, B. and Fu, C.C., “Use of Integral Piers to Enhance Aesthetic Appeal of Grade
Separation Structures (04-4021),” The Proceedings of Transportation Research
Board , January 11-15, Washington, DC, 2004.
Thanasattayawibul, N. “Curved Integral Abutment Bridges,” PhD Dissertation, Civil
and Environmental Engineering, University of Maryland, College Park, MD,
pp. 72-81, 2006.
Wasserman, E.P. and Walker, J.H., “Integral Abutments for Steel Bridges,” Virginia DOT,
October 1996, http://www.virginiadot.org/business/resources/semi-integral-20.pdf.
Chapter 17
AASHTO, AASHTO Guide Specifications for LRFD Seismic Bridge Design , 2nd
Edition, American Association of State Highway and Transportation Officials,
Washington, DC, with 2012 Interim.
Ahmed, M.S., “Seismic Assessment of Curved Bridges Using Modal Pushover
Analysis,” PhD Dissertation, Department of Civil and Environmental
Engineering, University of Maryland, College Park, MD, 2010.
Ahmed, M.S. and Fu, C.C., “Seismic Assessment of Long Curved Bridges Using
Modal Pushover Analysis: A Case Study,” The Proceedings of the 6th
International Conference on Bridge Maintenance, Safety and Management ,
July 8-12, Como, Italy, 2012.