References - Computational Analysis and Design of Bridge Structures - page 588

Allen, D.E. and Murray, T.M., “Design Criterion for Vibrations due to Walking,”
Engineering Journal , 4th quarter, AISC, 117-129, 1993.
ANSYS, ANSYS Mechanical User Guide , ANSYS Inc., Canonsburg, PA, 2012.
Aviram, A., Mackie, K.R., and Stojadinovic, B., “Guidelines for Nonlinear Analysis
of Bridge Structures in California,” Report No. UCB/PEER 2008/03, University
of California, Berkeley, CA, 2008, http://peer.berkeley.edu/publications/peer_
reports/reports_2008/web_PEER803_AVIRAM_etal.pdf.
BSI, “Steel, Concrete and Composite Bridges: Specification for Loads,” British Standard
BS 5400, Part 2, Appendix C, British Standards Institute, London, UK, 1978.
Cai, C.S., Albrecht, P., and Bosch, H., “Flutter and Buffeting Analysis. I: Finite-Element
and RPE Solution,” Journal of Bridge Engineering , 4(3), 174-180, 1999.
Cantieni, R. and Heywood, R., “OECD DIVINE Project: Dynamic Interaction
between Vehicle and Infrastructure Experiment, Element 6, Bridge Research:
Report on the Tests Performed in Switzerland and Australia,” Draft EMPA
Rep., EMPA, Dübendort, Switzerland, 1997.
Chopra, A.K. and Goel, R.K., “A Modal Pushover Analysis Procedure for Estimating
Seismic Demands for Buildings,” Earthquake Engineering and Structural
Dynamics , 31(3), 561-582, 2002.
Cole, D.J., and Cebon, D., “Validation of Articulated Vehicle Simulation,” Vehicle
System Dynamics , 21, 197-223, 1992.
Federal Emergency Management Agency (FEMA), “NEHRP Guidelines for the
Seismic Rehabilitation of Buildings,” FEMA 273/October 1997, Applied
Technology Council (ATC-33 Project), Redwood City, CA, 1997.
Federal Emergency Management Agency (FEMA), “NEHRP Recommended
Provisions for Seismic Regulations for New Buildings and Other Structures,”
FEMA 450, Washington, DC, 2003.
Fu, C.C. and Ahmed, M.S., “Nonlinearity in Bridge Structural Analysis,” in Focus on
Nonlinear Analysis Research , G. Padovani and M. Occhino, editors, Mathematics
Research Developments series, Nova Science Publishers, 2012.
Green, M.F. and Cebon, D., “Dynamic Response of Highway Bridges to Heavy
Vehicle Loads: Theory and Experimental Validation,” Journal of Sound and
Vibration , 170(1), 51-78, 1994.
Gu, Y., Fu, C.C., and Aggour, M.S. “Topographic effect on Seismic response of high-
pier Bridge subjected to Oblique incidence waves.” The Proceedings of iBridge
Conference , August 11-13, 2014, Istanbul, Turkey.
LRFD Guide Specifications for Design of Pedestrian Bridges, 2nd Edition, American Asso-
ciation of State Highway and Transportation Officials, Washington, DC, 2009.
LSTC, “LS-DYNA Theoretical Manual”, Livermore Software Technology Corpo-
ration, Livermore, CA, 1998. http://www.lstc.com/.
MacDougall, C., Green, M.F., and Shillinglaw, S., “Fatigue Damage of Steel Bridges
due to Dynamic Vehicle Loads,” Journal of Bridge Engineering , 11(3), 2006.
Mast, R., Marsh, L., Spry, C., Johnson, S., Griebenow, R., Guarre, J., and Wilson,
W., Seismic Design of Bridges—Design Examples 1-7 (FHWA - SA - 97 - 006 thru
012) , USDOT/FHWA, September 1996.
Murray, T.M., Allen, D.E., and Ungar, E.E., “Floor Vibrations due to Human Activity,”
AISC Steel Design Guide #11 , Chicago, IL, 1997, https://www.aisc.org/store/p-
1556-design-guide-11-floor-vibrations-due-to-human-activity-see.aspx.