Graphics Reference
In-Depth Information
1.
On the ribbon, click
Home > Feature > Hole
.
2.
Select the top face of the Flange.
3.
Select
Type > Hole Series
.
4.
Position the hole using the Reference line, as shown.
5.
Click
Finish
.
Under the
Specification
section, notice the three tabs: Start, Middle, and End. They are
used to set the hole parameters for the three bodies through which the hole passes. For this
example, you are required to only set the Start and End parameters.
6. Under the
Specifications
section, click the
Start
tab and set the parameters, as
shown.
Form: Simple
Screw Type: General Screw Clearance
Screw Size: M12
Fit: Normal (H13)
7.
Click the
End
tab and set the parameters, as shown.
Form: Threaded
Depth Type: Full
Handedness: Right Handed
Depth Limit: Through Body
8.
Click
OK
.
9.
Likewise, create three more series holes.