Graphics Reference
In-Depth Information
Adding Fasteners to the assembly
1.
On the ribbon, click
Tools > Reuse Library > Fastener Assembly
.
2.
On the
Fastener Assembly
dialog, select
Type >Hole
.
3.
Select anyone of the holes.
4.
Click the
Add Fastener Assembly
icon.
5.
Set the
Configuration Name
to
AM-Hex Bolt/Stacks
.
6.
Under the
Fastener Configuration
section, click the
Remove
icon next to
Plain Washer, Regular, AM
under
Top Stacks
.
7.
Click
OK
.
8.
On the
Configuration
section, click the
Properties
icon next to
Hex Bolt,
AM
.
9.
On the
Edit Reusable Component
dialog, set the
(L) Length
value to
100
.
Also, notice the parameters of the hex bolt in the
Details
section. They are read
only.
10.
Click
OK
.
11.
Expand the
Settings
section and check the
Create Constraints Automatically
option.
12.
In the
Configuration
section, right click on
AM-Hex Bolt Stacks
and select
Save Configuration
.
