References - Energy Harvesting Autonomous Sensor Systems - page 223

103. S.P. Beeby, M.J. Tudor, and N.M. White, “Energy harvesting vibration sources

for microsystems applications,” Measurement Science and Technology , vol. 17, no.
12, pp. R175-R195, 2006.

104. M. Umeda, K. Nakamura, and S. Ueha, “Analysis of the transformation of me-

chanical impact energy to electric energy using piezoelectric vibrator,” Japanese
Journal of Applied Physics , vol. 35, no. 5B, pp. 3267-3273, 1996.

105. C. Keawboonchuay and T.G. Engel, “Maximum power generation in a piezo-

electric pulse generator,” IEEE Transactions on Plasma Science , vol. 31(2), no. 1,
pp. 123-128, 2003.

106. M. Renaud, P. Fiorini, and C. Van Hoof, “Optimization of a piezoelectric uni-

morph for shock and impact energy harvesting,” Smart Materials and Structures ,
vol. 16, no. 4, pp. 1125-1135, 2007.

107. J.F. Antaki, G.E. Bertocci, E.C. Green, A. Nadeem, T. Rintoul, R.L. Kormos, and

B.P. Griffith, “A gait powered autologous battery charging system for artificial
organs,” American Society of Artificial Internal Organs Conference , pp. M588-M595,
1995.

108. J. Paradiso and M. Feldmeier, “A compact, wireless, self-powered pushbutton

controller,” Ubicomp 2001: Ubiquitous Computing, LNCS 2201, Springer-Verlag,

New York, 2001, pp. 299-304.

109. F. Schmidt and M. Heiden, Wireless Sensors Enabled by Smart Energy—Concepts

and Solutions , EnOcean GmbH, Oberhaching, Germany.

110. A. Rida, L. Yang, and M. Tentzeris, “Chapter 5: State-of-the-art technology for

RFID/sensors,” RFID-Enabled Sensor Design and Applications , Artech House, Lon-
don, 2010.

111. Piezo Systems, Inc., “Introduction to piezo transducers,” http://www.piezo.

com/tech2intropiezotrans.html , accessed on May 17, 2010.

112. S.B. Dewan, G.R. Slemon, and A. Straughen, Power Semiconductor Drives ,Wiley,

New York, 1984, Chapters 2 and 5.

113. K.Y. Hoe, “An investigation of self-powered RF wireless sensors,” Bachelor's

thesis, National University of Singapore, 2006.

114. H.W. Kim, A. Batra, S. Priya, K. Uchino, D. Markley, R.E. Newnham, and H.F.

Hofmann, “Energy harvesting using a piezoelectric cymbal transducer in dy-
namic environment,” Japanese Journal of Applied Physics, Part 1 (Regular Papers,
Short Notes and Review Papers) , vol. 43, no. 9A, pp. 6178-6183, 2004.

115. B.R. Face, “Self-powered, electronic keyed, multifunction switching system,”

Face International, Patent U.S. 7161276, 2007.

116. D. Dausch and S. Wise, Compositional Effects on Electromechanical Degradation of

RAINBOW Actuators , NASA , Hampton, VA, 1998.

117. R.G. Bryant, “LaRC TM -SI: a soluble aromatic polyimide,” High Performance Poly-

mers , vol. 8, pp. 607-615, 1996.

118. K. Mossi, C. Green, Z. Ounaies, and E. Hughes, “Harvesting energy using a thin

unimorph prestressed bender: Geometrical effects,” Journal of Intelligent Material
Systems and Structures , vol. 16, no. 3, pp. 249-261, 2005.

119. K. Mossi, Z. Ounaies, and S. Oakley, “Optimizing energy harvesting of a com-

posite unimorph pre-stressed bender,” 16th Technical Conference of the American
Society for Composites , 2001.

120. A.D. Danak, H.S. Yoon, and G.N. Washington, “Optimization of electrical out-

put in response to mechanical input in piezoceramic laminated shells,” ASME
International Congress and Exposition , pp. 309-315, 2003.