References - Energy Harvesting Autonomous Sensor Systems - page 222

87. N. Femia, G. Petrone, G. Spagnuolo, and M. Vitelli, “Optimization of perturb and

observe maximum power point tracking method,” IEEE Transactions on Power
Electronics , vol. 20, no. 4, pp. 963-973, 2005.

88. F. Liu, S. Duan, F. Liu, B. Liu, and Y. Kang, “A variable step size INC MPPT

method for PV systems,” IEEE Transactions on Industrial Electronics , vol. 55, no.
7, pp. 2622-2628, 2008.

89. T. Esram, J.W. Kimball, P.T. Krein, P.L. Chapman, and P. Midya, “Dynamic

maximum power point tracking of photovoltaic arrays using ripple correlation
control,” IEEE Transactions on Power Electronics , vol. 21, no. 5, pp. 1282-1291,
2006.

90. R.-Y. Kim, J.-S. Lai, B. York, and A. Koran, “Analysis and design of maximum

power point tracking scheme for thermoelectric battery energy storage system,”
IEEE Transactions on Industrial Electronics , vol. 56, no. 9, pp. 3709-3716, 2009.

91. I. Stark, “Invited talk: thermal energy harvesting with thermo life,” International

Workshop on Wearable and Implantable Body Sensor Networks (BSN 2006) , pp. 19-22,
2006.

92. V. Leonov, “Thermal shunts in thermoelectric energy scavengers,” Journal of Elec-

tronic Materials , vol. 38, no. 7, pp. 1483-1490, 2009.

93. S. Dalola, M. Ferrari, V. Ferrari, M. Guizzetti, D. Marioli, and A. Taroni, “Char-

acterization of thermoelectric modules for powering autonomous sensors,”
IEEE Transactions on Instrumentation and Measurement , vol. 58, no. 1, pp. 99-107,
2009.

94. T.S. Paing and R. Zane, “Resistor emulation approach to low-power energy

harvesting,” 37th IEEE Power Electronics Specialists Conference (PESC) , pp. 1-7,
2006.

95. J. Sun, D.M. Mitchell, M.F. Greuel, P.T. Krein, and R.M. Bass, “Averaged mod-

eling of PWM converters operating in discontinuous conduction mode,” IEEE
Transactions on Power Electronics , vol. 16, no. 4, pp. 482-492, 2001.

96. V. Vorperian, “Simplified analysis of PWM converters using model of PWM

switch. Part II: Discontinuous conduction mode,” IEEE Transactions on Aerospace
and Electronic Systems , vol. 26, pp. 497-505, 1990.

97. P.D. Mitcheson, P. Miao, B.H. Stark, E.M. Yeatman, A.S. Holmes, and T.C. Green,

“MEMS electrostatic micropower generator for low-frequency operation,” Sen-
sors and Actuators A: Physical , vol. 115, nos. 2-3, pp. 523-529, 2004.

98. S. R. Anton and H. A. Sodano, “A review of power harvesting using piezoelectric

materials (2003-2006),” Smart Materials and Structures , vol. 16, no. 3, pp. R1-R21,
2007.

99. S. Roundy, E.S. Leland, J. Baker, E. Carleton, E. Reilly, E. Lai, B. Otis, J.M. Rabaey,

P.K. Wright, and V. Sundararajan, “Improving power output for vibration-based
energy scavengers,” IEEE Pervasive Computing , vol. 4, no. 1, pp. 28-36, 2005.

100. Wikipedia, “Piezoelectricity,” http://en.wikipedia.org/wiki/Piezoelectricity,

accessed on May 7, 2010.

101. N.S. Shenck, “A demonstration of useful electric energy generation from piezoce-

ramics in a shoe,” Master's thesis, Massachusetts Institute of Technology (MIT),
Cambridge, MA, 1999.

102. M. Renaud, P. Fiorini, R. Van Schaijk, and C. Van Hoof, “Harvesting energy

from the motion of human limbs: The design and analysis of an impact-based
piezoelectric generator,” Smart Materials and Structures , vol. 18, no. 3, (16),
2009.