Civil Engineering Reference
In-Depth Information
Ljung, L. and Soderstrom, T.,
Theory and Practice of Recursive Identification,
MIT Press, Cambridge,
MA., 1983.
Ljung, L.,
System Identification: Theory for the User,
Prentice Hall, Englewood Cliffs, NJ, 1987.
Lo, C. and Koren, Y., Evaluation of Machine Tool Controllers,
1992 American Control Conference,
1:370,
1992.
Ludwick, S. J., Jenkins, H. E., and Kurfess, T. R., Determination of a Dynamic Grinding Model,
1994
International Mechanical Engineering Congress and Exposition,
DSC-Vol. 55-2: 843, 1994.
Ma, Q. and Ro, P. I. Use of Force Feedback for Dynamics Error Correction in Diamond Turning For
Surface Roughness Improvement,
ASPE 1994 Annual Meeting,
p.37, 1994.
Malkin, S. and Ritter, J. E., Grinding Mechanisms and Strength Degradation for Ceramics,
Journal of
Engineering for Industry,
111: 167, 1989.
Malkin, S.
Grinding Technology, Theory and Applications of Machining with Abrasives,
Ellis Horwood
Limited, Chichester, U.K., 1989.
Marion, J. E., Strengthening of Solid-State Laser Materials,
5th IEEE/OSA Conference on Lasers and Electro-
Optics,
p
.
232, 1985.
Marshall, E. R., and Shaw, M. C., The Size Effect in Metal Cutting,
ASME,
74:61, 1952.
Masory, O. and Koren, Y., Adaptive Control Systems in Turning,
CIRP Annals,
1980.
Masory, O. and Koren, Y., Real-Time Estimation of Cutting Process Parameters in Turning,
ASME Journal
of Engineering for Industry,
106: 400, 1985.
Maybeck, P. S. and Pogoda, D. L., Multiple Model Adaptive Controller For the STOL F-15 With Sensor/
Actuator Failures,
IEEE Conference on Decision and Control, Including The Symposium on Adaptive
Processes,
2:1566, 1989.
Merchant, E. Mechanics of the Metal Cutting Process,
J. Appl. Phys.,
16:207, 1945.
Morein, R. T. and Kalata, P., A Polynomial Algorithm for Noise Identification in Linear Systems,
5th IEEE
International Symposium on Intelligent Control,
p.595, 1990.
Nagao, T. and Hatamura, Y. Development Of A Flexible Grinding System With Six-Axis Force Sensor
For Curved Surfaces,
CIRP Annals
, 36:1:215, 1987.
Nagurka, M. L. Curve Performance of Rail Passenger Vehicles,
Ph.D. Thesis Dept. Mech. Eng. MIT
,
Cambridge, May 1983.
Nunes, A. C., Rounded Approximate Step Function for Interpolation,
NASA Tech Briefs,
17: 7: 84, July
1993.
Oaki, J., Stable Force Controller Design Based on Frequency Response Identification,
IEEE Workshop of
Intelligent Robots and Systems,
p
.
1116, 1991.
Okazaki, Y., A Micro Positioning Tool Post Using a Piezoelectric Actuator for Diamond Turning Machines,
Journal of the Japan Society of Precision Engineering,
54:7:1375, 1988.
Pappas, M. G. and Doss, J. E., Design of A Parallel Kalman Filter with Variable Forgetting Factors,
1988
American Control Conference,
p
.
2368.
Park, J. and Ulsoy, A. G., On-Line Flank Wear Estimation Using an Adaptive Observer and Computer
Vision, Part I & II
ASME Journal of Engineering for Industry,
115:30, 1993.
Pien, P. Y., and Tomizuka, M., Adaptive Force Control of Two Dimensional Milling,
1992 American
Control Conference,
1:399, 1992.
Purushothaman, S. and Srinivasa, Y., A Back-Propagation Algorithm Applied to Tool Wear Monitoring
International Journal of Machine Tools Manufacturing,
34:5:625, 1994.
Rajmohan and Radhakrishnan, V., On the Possibility of Process Monitoring in Grinding by Spark
Intensity Measurements,
ASME Journal of Engineering for Industry,
116:124, 1994.
Rangwala, S., and Dornfield, D., Sensor Integration Using Neural Networks for Intelligent Tool Condition
Monitoring,
ASME Journal of Engineering for Industry,
112:218, 1990.
Reichenbach, G., Mayer, I., Kalpakcioglu, S., and Shaw, M., The Role of Chip Thickness in Grinding,
Transaction of the ASME,
18:847, 1956.
Rowe, W. B., Inasaki, I., and Malkin, S., Applications of Artificial Intelligence in Grinding,
CIRP Annals,
43:2:521, 1994.
