Civil Engineering Reference
In-Depth Information
Rowe, W. B., Qi, H. S. and Zheng, H. W., The Effect of Deformation on the Contact Area in Grinding,
CIRP Annals,
42: 1: 409, 1993.
Rummelhart, D. and McClelland, J.,
Parallel Distributed Processing, Vol. 1,
MIT Press, Cambridge, MA,
1986.
Salmon, S. C.,
Modern Grinding Process Technology,
McGraw-Hill, New York, 1992.
Shaw, M. C., Fundamentals of Grinding Conference, Pittsburgh, PA, p.221, 1972.
Slotine, J. E. and Li, W.,
Applied Nonlinear Control,
Prentice Hall, Englewood Cliffs, NJ, 1991.
Smith, M., Annaswamy, H., and Slocum, A., Adaptive Control Strategies for a Precision Machine Tool
Axis,
Precision Engineering,
17:3, 1995.
Stengel, R. F., and Ryan, L. E., Stochastic Robutsness of Linear Time-Invariant Control Systems,
IEEE
Transactions on Automatic Control,
36:1:82, 1991.
Stute, G. Adaptive Control,
Technology of Machine Tools,
Vol. 4, Machine Tool Controls, Lawrence
Livermore Laboratory, Livermore, CA, 1980.
Szabo, B. and Wu, S. M., On-Line Techniques for Tool Condition Monitoring in Milling Operations,
IFAC Symposia Series - Proceedings of a Triennial World Congress,
5:59, 1990.
Tarn, J. H. and Tomizuka, M. On-Line Monitoring of Tool and Cutting Conditions in Milling,
ASME
Journal of Dynamic Systems, Measurement and Control,
111:206, 1989.
Tomizuka, M., Zero Phase Error Tracking Algorithm for Digital Control,
ASME Journal of Dynamic
Systems, Measurement and Control,
109:65, 1987.
Tomizuka, M., Dornfield, D., Bian, X., and Cai, H., Experimental Evaluation of the Preview Servo Scheme
for a Two-Axis Positioning System,
ASME Journal of Dynamic Systems, Measurement and Control,
106:1, 1984.
Tomizuka, M., Oh, J. and Dornfield, D., Model Reference Adaptive Control of the Milling Process,
ASME
Control of Manufacturing Processes and Robotic Systems,
p.55, 1983.
Tonshoff, H. K., Peters, J., Inasaki, I., and Paul, T., Modeling and Simulation of Grinding Processes,
CIRP
Annals,
41: 2: 677, 1992.
Tonshoff, H. K., Zinngrebe, M., and Kemmerling, M., Optimization of Internal Grinding by Microcom-
puter-Based Force Control,
Annals of the CIRP,
35:1:293, 1986.
Tung, E. and Tomizuka, M., Feedforward Tracking Controller Design Based on the Identification of Low
Frequency Dynamics,
ASME Journal of Dynamic Systems, Measurement and Control,
115: 348, 1993.
Tung, E., Anwar, G., and Tomizuka, M., Low Velocity Friction Compensation and Feedforward Solution
Based on Repetitive Control,
ASME Journal of Dynamic Systems, Measurement and Control,
115:
279, 1993.
Ulrich, B., Liu, L., Elbestawi, M. A., and Srivastava, A. K., Force Control For Robotic Rigid Disk Grinding,
1990 American Control Conference,
2: 1804, 1990.
Ulrich, B., Srivastava, A., and Elbestawi, M., Analysis of the Robotic Disc Grinding Process,
International
Journal of Advanced Manufacturing Technology,
7:2:82, 1992.
Ulsoy, A. G. Estimation of Time Varying Parameters in Discrete Time Dynamic Systems: A Tool Wear
Estimation Example,
1989 American Control Conference,
1: 68,
Ulsoy, A. G. and Koren, Y., Control of Machine Processes,
ASME Journal of Dynamic Systems, Measure-
ment and Control,
115:301, June 1993.
Ulsoy, A. G., Koren, Y., and Rasmussen, F., Control of Machine Processes,
ASME Journal of Dynamic
Systems, Measurement and Control,
105:107, June 1983.
Verkerk, J., The Real Contact Length in Cylindrical Grinding,
Annals of the CIRP,
24:1:259, 1975.
Vermeulen, P. J. and Johnson, K. L., Contact of Non-Spherical Elastic Bodies Transmitting Tangential
Forces,
J. Applied Mechanics,
p. 338, 1964.
Whitney, D. E., Edsall, A. C., Todtenkopf, A. B., Kurfess, T. R., and Tate, A. R., Development of an
Automated Robotic Weld Bead Grinding System,
ASME Journal of Dynamic Systems, Measurement
and Control,
112:166, 1990.
Wiberg, D. M., Another Approach to On-Line Parameter Estimation,
1987 American Control Conference
,
p. 418.
