Civil Engineering Reference
In-Depth Information
El-Wardani, T. Sadek, M., and Younis, M. A., Theoretical Analysis of Grinding Chatter,
ASME Journal of
Engineering for Industry,
109:4:314, 1987.
Fawcett, S. C. and Dow, T. A., Development of a Model for Precision Contour Grinding of Brittle
Materials,
Precision Engineering,
13:4:270, 1991.
Franco, S.,
Designing with Operational Amplifiers,
Addison-Wesley, Reading MA, 1988.
Franklin, G. F., Powell, J. D., and Workman, M. L.,
Digital Control of Dynamic Systems,
Addison-Wesley,
Reading, MA, Second Edition, 1990.
Fussell, B. K. and Srinivasan, K., Model Reference Adaptive Control of Force in End Milling Operations,
1988 American Control Conference,
2:1189.
Hahn, R. S., Improving Performance with Force-Adaptive Grinding,
Manufacturing Systems,
97:73,1986.
Hahn, R. S. and Lindsay, R. P., Principles of Grinding Part I Basic Relationships in Precision Machining,
Machinery,
p.5, July 1971.
Hahn, R. S. and Lindsay, R. P., Principles of Grinding Part II The Metal Removal Parameter,
Machinery
,
33: August 1971.
Jenkins, H. E., Kurfess, T. R., and Dorf, R. C., Design of a Robust Controller for a Grinding System,
The
Third IEEE Conference on Control Applications,
3:1579, 1994.
Jenkins, H. E., Process Estimation and Adaptive Control of a Grinding System, Ph.D. Thesis June 1996,
School of Mechanical Engineering, Geogia Institute of Technology, Atlanta, GA, 1996.
Jeong, S. and Ro, P. I., Cutting Force-Based Feedback Control Scheme for Surface Finish Improvement
in Diamond Turning,
American Control Conference,
2:1981, 1993.
Kalker, J. J., Rolling with Slip and Spin in the Presence of Dry Friction,
Wear,
9: 20, 1966.
Kalker, J. J., The Tangential Force Transmitted by Two Elastic Bodies Rolling Over Each Other with Pure
Creep,
Wear,
11:421, 1968.
Kolarits, F. M. Dynamic Modeling Of End Milling Forces and Surface Geometry and Adaptive Pole
Placement Force Control,
Rensselaer Polytechnic Institute,
Ph.D. Thesis, 1990.
Konig, W. and Werner, G., Adaptive Control Optimization Concept, Technological Basics and Application,
Annals of the CIRP,
23:1:101, 1974.
Koren, Y., Ko, T., and Ulsoy, A. G., Flank Wear Estimation Under Varying Cutting Conditions,
ASME
Journal of Dynamic Systems, Measurement, and Control,
113: 300, 1991.
Kubo, T., Anwar, G., and Tomizuka, M., Application of Nonlinear Friction Compensation to Arm Control,
1986 IEEE Int. Conf. on Robotics and Automation,
p. 722.
Kumar, K. V. and Shaw, M. C., The Role of Wheel-Work Deflection in Grinding Operations,
ASME
Journal of Engineering for Industry,
103:73, 1981.
Kurfess, T. R. and Nagurka, M. L., A Geometric Representation of Root Sensitivity,
ASME Journal of
Dynamic Systems, Measurement, and Control,
116:4:305, 1994.
Kurfess, T. R., Whitney, D. E., and Brown, M. L., Verification of a Dynamic Grinding Model,
ASME
Journal of Dynamic Systems, Measurement and Control,
110:403, 1988.
Landau, I. D.,
Adaptive Control,
Dekker, New York, 1979.
Lange, F. and Hirzinger, G., Iterative Self-Improvement of Force Feedback Control in Contour Tracking,
IEEE International Conference on Robotics and Automation,
2:1399, 1992.
Lauderbaugh, L. K. and Ulsoy, A. G., Dynamic Modeling for Control of the Milling Process,
ASME Journal
of Engineering for Industry,
110:367,1988.
Lauderbaugh, L. K. and Ulsoy, A. G., Model Reference Adaptive Force Control in Milling,
ASME Journal
of Engineering for Industry,
111:13, 1989.
Lee, J. H., Morari, M., and Garcia, C. E., State-Estimation-Based Model Predictive Control with On-Line
Robustness Tuning Parameters,
1991 American Control Conference,
3:2373.
Lewis, F. L.,
Optimal Estimation,
John Wiley and Sons, New York, 2nd Ed., 1992.
Liang, S. Y. and Perry, S. A., In-Process Compensation For Milling Cutter Runout Via Chip Load
Manipulation,
ASME Journal of Engineering for Industry,
116:2:153, 1994.
Liang, S. Y., Lecture Notes
Machine Tool Analysis and Control,
ME-8403B, Georgia Institute of Technology,
G. W. Woodruff School of Mechanical Engineering, 1994.
