Digital Signal Processing Reference
In-Depth Information
Storage temp: -30°C to 70°C
Stored states: 4 named user configurations
Power on state: default or last
Interface: IEEE-488 and RS-232 std.
Language: SCPI-1997, IEEE-488.2
Dimensions (w
×
h
×
d)
Bench top: 254
×
104
×
374 mm
Rack mount: 213
×
89
×
348 mm
Weight: 4.6 kg
Safety designed to EN61010-1, CSA1010.1, UL-311-1
EMC tested to EN55011, IEC-1326-1
Vibration and shock: MIL-T-28800E, Type III, Class 5
Acoustic noise: 40 dBA
Warm-up time: 1 hour
Calibration interval: 1 year
Warranty: 1 year
A.3
Operating Instructions for HP 3324A Synthesized
Function/Sweep Generator
The front panel of the HP 3324A has several operating keys to control it in
either the single frequency or sweep mode operation. The experiments in
this topic involve only the single frequency operation, and hence, only this
operation will be discussed here. For further details, please refer to the
Hewlett Packard 3324A Manual or the Agilent Web site.
1
Following is the sequence of steps to be performed while operating the
HP 3324A Synthesized Function/Sweep generator.
•
Turn on the HP 3324A by pressing the power switch
standby
. Power
is then applied to all of the HP 3324A circuits, and self tests are
performed automatically by the instrument.
•
Check that the
signal on/off
key is
not
lit. It is an important precau-
tion to set the specifications of the waveform before changing the
signal on/off
key to lit position.
•
Press the
function
key to select the waveform that is required. Use
the arrow keys to move up and down the menu. Examples of wave-
forms are
sine
,
square
,
triangular
. Press
select
after highlighting the
required waveform.
