Digital Signal Processing Reference
In-Depth Information
•
Press the
frequency
key to set the frequency of the waveform. For
example, use the numeric keys to select 1 MHz as the frequency of
the waveform.
•
Press the
amplitude
key to set the peak-to-peak amplitude of the
waveform. For example, set the amplitude at 1 volt.
•
Set the
phase
key at 0 degrees, unless other values are specified.
•
Set the
dc offset
at 0 volt, unless specified otherwise.
•
After selecting and setting the values of the waveform, press the
signal on/off
key so that it is in the lit position. The signal can be
fed out the BNC connector to the circuit.
Reference
1.
Agilent Technologies,
Agilent 33250A Function/Arbitrary Waveforme Generator,
