Hardware Reference
In-Depth Information
Figure 6-29.
Route the main ATX power cable from the power supply
chamber into the main chamber
Figure 6-30.
Connect the main ATX power cable
The next step is to route and connect the ATX12V power cable, as shown in
Figures 6-31 and 6-32. The ATX12V motherboard connector is located between
the CPU socket and the rear I/O panel. Orient the ATX12V cable properly, and
press down firmly until it snaps into place. Examine the connection to make
sure that the latch is engaged.
Figure 6-31.
Route the ATX12V power cable from the power supply
chamber into the main chamber
Figure 6-32.
Connect the ATX12V power cable
InstallingtheOpticalDrive
The next step is to install the optical drive. The Antec NSK-2480 case provides
two external 5.25” drive bays, either or both of which can be used for optical
drives or other 5.25” devices, such as the Antec Easy SATA hard drive docking
station. To begin installing the optical drive, press the inside of the plastic bezel
until it snaps out, as shown in Figure 6-33.
