Biomedical Engineering Reference
In-Depth Information
Lee, J.W., Won, C.W., Chun, B.S., and Sohn, H.Y. 1993. Dip-coating of alumina films by the sol-gel
method.
J. Mater. Res.
8:3151-3157.
Lepienski, C.M. Pharr, G.M., Park, Y.J., Watkins, T.R., Misra, A., and Zhang, X. 2004. Factors limit-
ing the measurement of residual stresses in thin films by nanoindentation.
Thin Solid Films
447-448:251-257.
Lim, Y.M., Hwang, K.S., and Park, Y.J. 2001. Sol-gel derived functionally graded TiO
2
/HAp films on
Ti-6Al-4V implants.
J. Sol-Gel Sci. Technol.
21:123-128.
Liu, Y., Hunziker, E.B., Layrolle, P., Van Blitterswijk, C., Calvert, P.D., and de Groot, K. 2003,
Remineralization of demineralized albumin-calcium phosphate coatings.
J. Biomed. Mater. Res.
Part A
67(4):1155-1162.
Martina, M., Subramanyam, G., Weaver, J.C., Hutmacher, D.W., Morse, D.E., and Valiyaveettil, S.
2005. Developing macroporous bicontinuous materials as scaffolds for tissue engineering.
Biomaterials
26:5609-5616.
Masuda, Y., Matubara, K., and Sakka, S. 1990. Synthesis of hydroxyapatite from metal alkoxides
through sol-gel technique.
J. Ceram. Soc. Jpn.
98:84-94.
Mazdiyasni, K.S. 1982. Powder synthesis form metal-organic precursors.
Ceram. Int.
8:42-56.
Melpolder, S.M. and Coltrain, B.K. 1988. Optimization of sol-gel film properties, 811-816. In
Better
Ceramics Through Chemistry,
3rd Edition. Brinker, C.J., Clark, D.E., and Ulrich D.R. (eds.).
Pittsburgh, PA: Materials Research Society.
Mencik, J. and Swain, M.V. 1995. Errors associated with depth-sensing microindentation tests.
J.
Mater. Res.
10:1491-1501.
Mencik, J., Munz, D., Qut, E., Weppelmann, E.R., and Swain, M.V. 1997. Determination of elastic
modulus of thin layers using nanoindentation.
J. Mater. Res.
12:2475-2484.
Milev, A., Kannangara, G.S.K., and Ben-Nissan, B. 2002. Ligand substitution and complex formation
in hydroxyapatite sol-gel system.
Key Eng. Mat.
218-220:79-84.
Milev, A., Kannangara, K., and Ben-Nissan, B. 2003. Morphological stability of plate-like carbonated
hydroxyapatite.
Mater. Lett.
57(13-14):1960-1965.
Mittal, K.L. 1995. Adhesion measurement of films and coatings: A commentary. In
Adhesion
Measurements of Films and Coatings.
Mittal, K.L. (ed.) Utrecht: VSP.
Nix, D.W. 2006. Mechanical properties of thin films (class notes for a graduate class at Stanford
University), iMechanica, http://imechanica.org/node/530.
Oliver, W.C. and Pharr, G.M. 1992. A new improved technique for determining hardness and elastic
modulus using load and sensing indentation experiments.
J. Mater. Res.
7:1564-1582.
Orcel, G. and Hench, L.L. 1986. Effect of formamide additive on the chemistry of silica sol-gels:
Part I. NMR of silica hydrolysis.
J. Noncryst. Solids
79:177-194.
Oonishi, H., Aoki, H., and Sawai, K. (eds.) 1988.
Bioceramics
, Volume 1.
Proceedings of 1st International
Symposium on Ceramics in Medicine, Ishiyaku EuroAmerica, Inc. Tokyo.
Parker, A.R. and Townley, H.E. 2007. Biomimetics of photonic nanostructures.
Nat. Nanotechnol.
2:347-353.
Parker, A.R. and Martini, N. 2006. Structural colour in animals—Simple to complex optics.
Optics
Laser Technol.
38:315-322.
Percy, M.J., Bartlett, J.R., Spiccia, L. West, B.O., and Woolfrey, J.L. 2000. The influence of b-diketones
on hydrolysis and particle growth from zirconium (IV)
N
-propoxide in
n
-propanol.
J. Sol-Gel
Sci. Technol.
19:315-319.
Pettit, R.B., Ashley, C.S., Reed, S.T., and Brinker, C.J. 1988. Antireflective films from the sol-gel pro-
cess, 80-109. In
Sol-Gel Technology for Thin Films, Fibers, Performs, Electronics, and Specialty Shapes.
Klien, L.C. (ed.) Park Ridge, NJ: Noyes Publishing.
Petite, H., Viateau, V., Bensaïd,
W., Meunier, A., de Pollak, C., Bourguignon,
M., Oudina,
K.,
Sedel, L., and Guillemin, G. 2000. Tissue-engineered bone regeneration.
Nat. Biotechnol.
18:959-963.
Paterson, M.J., Paterson P.J.K., and Ben-Nissan, B. 1998. The dependence of structural and mechani-
cal properties on film thickness in sol-gel zirconia films.
J. Mater. Res.
13(2):388.
Search WWH ::
Custom Search