Biomedical Engineering Reference
In-Depth Information
Raman, V., Bahl, O.P., and Dhawan, U. 1995. Synthesis of silicon carbide through the sol-gel process
from different precursors. J. Mater. Sci. 30:2686-2693.
Rho, J.Y., Roy, M.E., Tsui, T.Y., and Pharr, G.M. (1999). Properties of microstructural components of
human bone tissue as measured by nanoindentation. J. Biomed. Mater. Res . 45:48-54.
Rocha, J.H.G., Lemos A.F., Agathopoulos, S., Valero, P., Kannan, S., Oktar, F.N., and Ferriera, J.M.F.
2005. Scaffolds for bone restoration from cuttlefish. Bone 850-857.
Roest, R. 2010. Interfacial characterisation of sol-gel derived coatings of hydroxyapatite and zirconia
thin films with anodised titanium substrates. Ph.D. thesis, University of Technology, Sydney,
Australia.
Roest, R. and Ben-Nissan, B. 2001. Surface modification of anodized titanium for calcium phosphate
coatings. Proceedings of the Engineering Materials 2001 , Pereloma, E. and Raviprasad, K. (eds.),
115-120.
Roest, R., Eberhardt, A.W., Latella, B.A., Wuhrer, R., and Ben-Nissan, B. 2004. Adhesion of sol-gel
derived zirconia nano-coatings on surface treated titanium. In Bioceramics 16. Key Eng. Mat.
254-256:455-458.
Roy, R. 1987. Ceramics by the solution-sol-gel route. Science 238(4834):1664-1669.
Roy, D.M. and Roy, R. 1954. An experimental study of the formation and properties of synthetic sep-
entines and related layer silicates. Am. Mineral. 39:957-975.
Saha, R. and Nix, W. D. 2002. Effects of the substrate on the determination of thin film mechanical
properties by nanoindentation. Acta Material. 50:23-38.
Sakka, S., Kamiya, K, Makita, K., and Tamamoto, Y. 1984. Formation of sheets and coating films from
alkoxide solutions. J. Noncryst. Solids 63:223-235.
Sarig, S. and Kahana, F. 2002. Rapid formation of nanocrystalline apatite. J. Cryst. Growth
237-239:55-59.
Scafidi, P. and Ignat, M. 1998. Cracking and loss of adhesion of Si 3 N 4 SiO 2 :P films deposited on Al
substrates. J. Adhes. Sci. Technol. 12:1219-1242.
Schmidt, H., Rinn, G., Nab, R., and Sporn, D. 1988. Film preparation by inorganic-organic sol-gel
synthesis. Mater. Res. Soc. Symp. Proc. 32:743-754.
Schroder H. 1966. New sun-shielding glasses for architectural purposes. Vetro Silicati. 10:10-14.
Schroeder, H. 1965. Water-dispersed industrial and architectural coatings. Paint Varnish Prod.
55:31-46.
Schwart, I., Anderson, P., de Lambilly, H., and Klein, L.C. 1986. Stability of lithium silicate gels. J.
Noncryst. Solids 83:391-399.
Scriven, L.E. 1988. Physics and application of dip coating and spin coating. Mater. Res. Soc. Symp.
Proc. 121:717-729.
Sengers B.G., Please, C.P., and Oreffo, R.O.C. 2007. Experimental characterization and computa-
tional modeling of two-dimensional cell spreading for skeletal regeneration. J. R. Soc. Interface
4:1107-1117.
Shih, W.J., Chen, Y.F., Wang, M.C., and Hon, M.H. 2004. Crystal growth and morphology of the
nanosized hydroxyapatite powders synthesized from CaHPO 4 ·2H 2 O and CaCO 3 by hydrolysis
method. J. Cryst. Growth 270:211-218.
Shors, E.C. 1999. Porous ceramics and bone growth factors for bone grafting: Now and into the
millennium. 12th International Symposium on Ceramics in Medicine, Bioceramics 12. Nara,
Japan.
Stoch, A., Jastrzebski, W., Dlugon, E., Lejda, W., Trybalska, B., Stoch, G.J., and Adamczyk, A. 2005.
Sol-gel derived hydroxyapatite coatings on titanium and its alloy Ti6Al4V. J. Mol. Struct.
744-747:633-640.
Stoney, G.G. 1909. The tension of thin metallic films deposited by electrolysis. Proc. R. Soc. London A
82:172-173.
Strawbridge, I. and James, P.F. 1986. Thin silica films prepared by dip coating . J. Noncryst. Solids
82:366-372.
Suansuwan, N. and Swain, M.V. 2003. Adhesion of porcelain to titanium and a titanium alloy. J. Dent.
31:509-518.
Search WWH ::




Custom Search