Synthesis and Characterization of Hydroxyapatite Nanocoatings by Sol–Gel Method for Clinical Applications - Biological and Biomedical Coatings: Processing and Characterization - page 76

Ignat, M. 1996. Mechanical response of multilayers submitted to in-situ experiments. Key Eng. Mater.
116-117:279-290.
Ignat, M., Marieb, T., Fukimoto, H., and Flinn, P.A. 1999. Mechanical behaviour of submicron multi-
layers submitted to microtensile experiments. Thin Solid Films 353:201-207.
Jimenez, C. and Langlet, M. 1994. Formation of TiN by nitration of TiO 2 films deposited by ultrasoni-
cally assisted sol-gel technique. Surf. Coat. Technol. 68-69:249-252.
Kealley, C.S., Latella, B.A., Van Riessen, A., Elcombe, M., and Ben-Nissan, B. 2008. Micro- and nano-
indentation of a hydroxyapatite-carbon nanotube composite. J. Nanosci. Nanotechnol.
8:3936-3941.
Kim, H.W., Kim, H.E., Salih, V., and Knowles, J.C. 2005. Hydroxyapatite and titania sol-gel composite
coatings on titanium for hard tissue implants; mechanical and in vitro biological performance .
J. Biomed. Mater. Res. Part B: Appl. Biomater. 72B:1-8.
Kim, S.S., Park, M.S., Gwak, S.J., Choi, C.Y., and Kim, B.S. 2006. Accelerated bonelike apatite growth
on porous polymer/ceramic composite scaffolds in vitro. Tissue Eng. 12:2997-3006.
Kirk, P. and Pilliar, R. 1999. The deformation response of sol-gel-derived thin films on 316L stainless
steel using a substrate straining test. J. Mater. Sci. 34:3967-3975.
Klein, L.C. (ed.). 1988. Sol-Gel Technology for Thin Films, Fibers, Preforms, Electronics and Specialty
Shapes . Park Ridge, NJ: Noyes Publishing.
Kokubo, T., Kushitani, H., Ohtsuki, C., Sakka, S., and Yamamuro, T. 1992. Chemical reaction of bioac-
tive glass and glass-ceramics with a simulated body fluid. . J Mater Sci: Mater. Med. 3(2):79-83.
Kokubo T., Kim, H.M., Kawashita M., and Nakamura T. 2000. Novel ceramics for biomedical applica-
tions. J. Aust. Ceram. Soc. 36:37-46.
Kokubo, T. and Takadama, H. 2006. How useful is SBF in predicting in vivo bone bioactivity?
Biomaterials 27:2907-2915.
Kolos, E.C., Ruys, A.J., Rohanizadeh, R., Nuir, M.M., and Roger, G. 2006. Calcium phosphate fibres
synthesized from a simulated body fluid. J. Mater. Sci.: Mater. Med. 17:1179-1189.
Kraus, G.T., Oldweiler, C.S., and Giannelis, E.P. 1996. Synthesis and oxidation kinetics of sol-gel
and sputtered tantalum nitride thin films. 410, 295-300. In Covalent Ceramics III—Science and
Technology of Non-Oxides. Pittsburgh, PA: Materials Research Society.
Kuper, A., Clissold, R., Martin, P.J., and Swain, M.V. 1997. A comparative assessment of three
approaches for ranking the adhesion of TiN coatings onto two steels. Thin Solid Films
308-309:329-333.
Latella, B.A., Ignat, M., Barbé, C.J., Cassidy, D.J., and Li, H. 2004. Cracking and decohesion of sol-gel
hybrid coatings on metallic substrates. J. Sol-Gel Sci. Technol. 31:143-149.
Latella, B.A., Gan, B., and Li, H. 2007a. Fracture toughness and adhesion of thermally grown tita-
nium oxide on medical grade pure titanium. Surf. Coat. Technol. 201:6325-6331.
Latella, B.A., Triani, G., and Evans, P. 2007b. Toughness and adhesion of atomic layer deposited alu-
mina films on polycarbonate substrates. Scr. Materi. 56:493-496.
Latella, B.A., Gan, B.K., Barbé, C.J., and Cassidy, D.J. 2008. Nanoindentation hardness, Young's mod-
ulus, and creep behavior of organic-inorganic silica-based sol-gel thin films on copper. J. Mater.
Res. 23(9):2357-2365.
Layrolle, P. and Lebugle, A. 1994. Characterization and reactivity of nanosized calcium phosphate
prepared in anhydrous ethanol. Chem. Mater. 6:1996-2004.
Layrolle, P., Ito, A., and Tateishi, T. 1998. Sol-gel synthesis of amorphous calcium phosphate and
sintering into microporous hydroxyapatite bioceramics. J. Am. Ceram. Soc. 81:1421-1428.
LeGeros, R.Z. 1991. In Calcium Phosphates in Oral Biology and Medicine. Monographs in Oral Sciences ,
Vol. 15. Myers, H. (ed). Basel: S. Karger.
LeGeros, R.Z. 1993. Biodegradation and bioresorption of calcium phosphate ceramics . Clin Mater.
14:65-88.
LeGeros, R.Z., Coelho, P.G., Holmes, D., Dimaano, F., and LeGeros, J.P. 2011. Orthopedic and den-
tal implant surfaces and coatings. 295-328. In Biological and Biomedical Coatings: Applications ,
Zhang, S. (ed). Boca Raton, Florida: CRC Press.