Hydrothermal Crystallization with Microstructural Self-Healing Effect on Mechanical and Failure Behaviors of Plasma-Sprayed Hydroxyapatite Coatings - Biological and Biomedical Coatings: Processing and Characterization

Biomedical Engineering Reference

In-Depth Information

174. Dong, Z. L., Khor, K. A., Quek, C. H., White, T. J., and P. Cheang. 2003. TEM and STEM analy-

TEM and STEM analy-

sis on heat-treated and in vitro plasma-sprayed hydroxyapatite/Ti-6Al-4V composite coatings.

Biomaterials 24:97-105.

175. Arias, J. L., Garcia-Sanz, F. J., and M. B. Mayor, et al. 1998. Physicochemical properties of cal-

, Z. L., Khor, K. A., Quek, C. H., White, T. J., and P. Cheang. 2003. TEM and STEM analy-

Z. L., Khor, K. A., Quek, C. H., White, T. J., and P. Cheang. 2003. TEM and STEM analy-

. L., Khor, K. A., Quek, C. H., White, T. J., and P. Cheang. 2003. TEM and STEM analy-

L., Khor, K. A., Quek, C. H., White, T. J., and P. Cheang. 2003. TEM and STEM analy-

., Khor, K. A., Quek, C. H., White, T. J., and P. Cheang. 2003. TEM and STEM analy-

, Khor, K. A., Quek, C. H., White, T. J., and P. Cheang. 2003. TEM and STEM analy-

, K. A., Quek, C. H., White, T. J., and P. Cheang. 2003. TEM and STEM analy-

K. A., Quek, C. H., White, T. J., and P. Cheang. 2003. TEM and STEM analy-

. A., Quek, C. H., White, T. J., and P. Cheang. 2003. TEM and STEM analy-

A., Quek, C. H., White, T. J., and P. Cheang. 2003. TEM and STEM analy-

., Quek, C. H., White, T. J., and P. Cheang. 2003. TEM and STEM analy-

, Quek, C. H., White, T. J., and P. Cheang. 2003. TEM and STEM analy-

, C. H., White, T. J., and P. Cheang. 2003. TEM and STEM analy-

C. H., White, T. J., and P. Cheang. 2003. TEM and STEM analy-

. H., White, T. J., and P. Cheang. 2003. TEM and STEM analy-

H., White, T. J., and P. Cheang. 2003. TEM and STEM analy-

., White, T. J., and P. Cheang. 2003. TEM and STEM analy-

, White, T. J., and P. Cheang. 2003. TEM and STEM analy-

, T. J., and P. Cheang. 2003. TEM and STEM analy-

T. J., and P. Cheang. 2003. TEM and STEM analy-

. J., and P. Cheang. 2003. TEM and STEM analy-

J., and P. Cheang. 2003. TEM and STEM analy-

., and P. Cheang. 2003. TEM and STEM analy-

, and P. Cheang. 2003. TEM and STEM analy-

and P. Cheang. 2003. TEM and STEM analy-

Cheang. 2003. TEM and STEM analy-

2003. TEM and STEM analy-

Physicochemical properties of cal-

cium phosphate coatings produced by pulsed laser deposition at different water vapour pres-

sures. Biomaterials 19:883-888.

176. Boyd, A., Akay, M., and B. J. Meenan. 2003. Infl uence of target surface degradation on the prop-

and M. B. Mayor, et al. 1998. Physicochemical properties of cal-

Mayor, et al. 1998. Physicochemical properties of cal-

et al. 1998. Physicochemical properties of cal-

. 1998. Physicochemical properties of cal-

1998. Physicochemical properties of cal-

Inluence of target surface degradation on the prop-

erties of RF magnetron-sputtered calcium phosphate coatings. Surf. Interface. Anal . 35:188-198.

177. Takadama, H., Kim, H. M., Kokubo, T., and T. Nakamura. 2001. An X-ray photoelectron spec-

and B. J. Meenan. 2003. Infl uence of target surface degradation on the prop-

B. J. Meenan. 2003. Infl uence of target surface degradation on the prop-

Meenan. 2003. Infl uence of target surface degradation on the prop-

2003. Infl uence of target surface degradation on the prop-

An X-ray photoelectron spec-

troscopy study of the process of apatite formation on bioactive titanium metal. J. Biomed. Mater.

Res . 55:185-193.

178. Massaro, C., Baker, M. A., Cosentino, F., Ramires, P. A., Klose, S., and E. Milella. 2001. Surface

and biological evaluation of hydroxyapatite-based coatings on titanium deposited by different

techniques. J. Biomed. Mater. Res . 58B:651-657.

179. Healy, K. E., and P. Ducheyne P. 1992. The mechanisms of passive dissolution of titanium in a

model physiological environment. J. Biomed. Mater. Res . 26:319-338.

180. Ramires, P. A., Romito, A. M., Cosentino, F., and E. Milella. 2001. The influence of titania/

hydroxyapatite composite coatings on in vitro osteoblasts behavior. Biomaterials 22:1467-1474.

181. Yang, Y., Kim, K. H., Agrawal, C. M., and J. L. Ong. 2003. Influence of post-deposition heating

time and the presence of water vapor on sputter-coated calcium phosphate crystallinity. J. Dent.

Res . 82:833-837.

182. Liu, C., Huang, Y., Shen, W., and J. Cui. 2001. Kinetics of hydroxyapatite precipitation at pH 10

to 11. Biomaterials 22:301-306.

183. Ueda, M., Imai, Y., Motoe, A., Uchida, K., and N. Aso. 2000. Adhesion of hydroxyapatite layer

prepared by thermal plasma spraying to titanium or titanium (IV) oxide substrate. J. Ceram. Soc.

Jpn . 108:865-868.

184. Fernández-Pradas, J. M., García-Cuenca, M. V., Clèries, L., Sardin, G., and J. L. Morenza. 2002.

Influence of the interface layer on the adhesion of pulsed laser deposited hydroxyapatite

coatings on titanium alloy. Appl. Surf. Sci . 195:31-37.

185. Cheng, K., Zhang, S., Weng, W., Khor, K. A., Miao, S., and Y. Wang. 2008. The adhesion

strength and residual stress of colloidal-sol gel derived β-tricalcium phosphate/fluoridated-

hydroxyapatite biphasic coatings. Thin Solid Films 516:3251-3255.

186. Ievlev, V. M., Domashevskaya, E. P., and V. I. Putlyaev et al. 2008. Structure, elemental composi-

and T. Nakamura. 2001. An X-ray photoelectron spec-

T. Nakamura. 2001. An X-ray photoelectron spec-

Nakamura. 2001. An X-ray photoelectron spec-

. 2001. An X-ray photoelectron spec-

2001. An X-ray photoelectron spec-

Structure, elemental composi-

tion, and mechanical properties of films prepared by radio-frequency magnetron sputtering of

hydroxyapatite. Glass Phys. Chem . 34:608-616.

187. Cheng, K., Ren, C., and W. Wang et al. 2009. Bonding strength of fl uoridated hydroxyapatite coat-

Ievlev, V. M., Domashevskaya, E. P., and V. I. Putlyaev et al. 2008. Structure, elemental composi-

. Bonding strength of luoridated hydroxyapatite coat-

ings: A comparative study on pull-out and scratch analysis. Thin Solid Films 517:5361-5364.

188. Heleno, R. A., Wagner, N. S., and J. R. T. Branco. 2009. Performance evaluation of hydroxyapa-

Cheng, K., Ren, C., and W. Wang et al. 2009. Bonding strength of fl uoridated hydroxyapatite coat-

. Performance evaluation of hydroxyapa-

tite coatings thermally sprayed on surgical fixation pins. Key Eng. Mater . 396-398:69-75.

189. Xiong, X.-B., Zeng, X.-R., Zou, C.-L., Li, P., and Y.-B. Fan. 2009. Infl uence of hydrothermal tem-

Heleno, R. A., Wagner, N. S., and J. R. T. Branco. 2009. Performance evaluation of hydroxyapa-

Inluence of hydrothermal tem-

perature on hydroxyapatite coating transformed from monetite on HT-C/C composites by

induction heating method. Surf. Coat. Technol . 204:115-119.

190. Wang, B. C., Lee, T. M., Chang, E., and C. Y. Yang. 1992. Effect of coating thickness on the shear

strength and failure mode of plasma sprayed hydroxyapatite coatings to bone. Biomed. Eng .

4:605-609.

191. Hayashi, K., Inadome, T., Mashima, T., and Y. Sugioka. 1993. Comparison of bone-implant

interface shear strength of solid hydroxyapatite and hydroxyapatite-coated titanium implants.

J. Biomed. Mater. Res . 27:557-563.

192. Moroni, A., Caja, V. L., Sabato, C., Egger, E. L., Gottsauner-Wolf, F., and E. Y. S. Chao. 1994. Bone

ingrowth analysis and interface evaluation of hydroxyapatite coated versus uncoated titanium

porous bone implants. J. Mater. Sci.: Mater. Med . 5:411-416.

193. Wang, S., Lacefield, W. R., and J. E. Lemons. 1996. Interfacial shear strength and histology of

plasma sprayed and sintered hydroxyapatite implants in vivo. Biomaterials 17:1965-1970.

Xiong, X.-B., Zeng, X.-R., Zou, C.-L., Li, P., and Y.-B. Fan. 2009. Infl uence of hydrothermal tem-

Biological and Biomedical Coatings: Processing and Characterization

Search WWH ::

Custom Search

Home