Biomedical Engineering Reference
In-Depth Information
194. Thompson, J. I., Greqson, P. J., and P. A. Revell. 1999. Analysis of push-out test data based on
interfacial fracture energy. J. Mater. Sci.: Mater. Med . 10:863-868.
195. Lopes, M. A., Santos, J. D., and F. J. Monteiro, et al. 2001. Push-out testing and histological
evaluation of glass reinforced hydroxyapatite composites implanted in the tibia of rabbits. J.
Biomed. Mater. Res . 54:463-469.
196. Lee, T. M., Yang, C. Y., Chang, E., and R. S. Tsai. 2004. Comparison of plasma-sprayed hydroxy-
Comparison of plasma-sprayed hydroxy-
apatite coatings and zirconia-reinforced hydroxyapatite composite coatings: In vivo study. J.
Biomed. Mater. Res. A 71:652-660.
197. Sergo, V., Sbaizero, O., and D. R. Clarke. 1997. Mechanical and chemical consequences of the
residual stresses in plasma sprayed hydroxyapatite coatings. Biomaterials 18:477-482.
198. Spivak, J. M., Ricci, J. L., Blumenthal, N. C., and H. Alexander. 1990. A new canine model to
evaluate the biological response of intramedullary bone to implant materials and surfaces. J.
Biomed. Mater. Res . 24:1121-1149.
199. Park, E., Condrate, R. A., Hoelzer, D. T., and G. S. Fischman. 1998. Interfacial characterization
of plasma-spray coated calcium phosphate on Ti-6Al-4V. J. Mater. Sci.: Mater. Med . 9:643-649.
200. Wen, J., Leng, Y., Chen, J., and C. Zhang. 2000. Chemical gradient in plasma-sprayed HA coat-
ings. Biomaterials 21:1339-1343.
201. DeBruijn, J. D., Bovell, Y., and C. van Blitterswijk. 1994. Structural arrangements at the interface
between plasma sprayed calcium phosphates and bone. Biomaterials 15:543-550.
202. Tsui, Y. C., Doyle, C., and T. W. Clyne. 1998. Plasma sprayed hydroxyapatite coatings on titanium
substrates: Part 1. Mechanical properties and residual stress levels. Biomaterials 19:2015-2029.
203. Ji, H., Ponton, C. B., and P. M. Marquis. 1992. Microstructural characterization of hydroxyapa-
tite coating on titanium. J. Mater. Sci.: Mater. Med . 3:283-287.
204. Kurzweg, H., Heimann, R. B., and T. Troczynski. 1998. Adhesion of thermally sprayed hydroxy-
Lee, T. M., Yang, C. Y., Chang, E., and R. S. Tsai. 2004. Comparison of plasma-sprayed hydroxy-
1998. Adhesion of thermally sprayed hydroxy-
apatite-bond-coat systems measured by a novel peel test. J. Mater. Sci.: Mater. Med . 9:9-16.
205. Heimann, R. B., Kurzweg, H., Ivey, D. G., and M. L. Wayman. 1998. Microstructural and in
vitro chemical investigations into plasma-sprayed bioceramic coatings. J. Biomed. Mater. Res. B
43[4]:441-450.
206. Heimann, R. B. 1999. Design of novel plasma sprayed hydroxyapatite-bond coat bioceramic
systems. J. Therm. Spray Technol . 8[4]:597-604.
207. Heimann, R. B., Schürmann, N., and R. T. Müller. 2004. In vitro and in vivo performance
of Ti6Al4V implants with plasma-sprayed osteoconductive hydroxylapatite-bioinert tita-
nia bond coat “duplex” systems: An experimental study in sheep. J. Mater. Sci.: Mater. Med .
15:1045-1052.
208. Heimann, R. B., and R. Wirth. 2006. Formation and transformation of amorphous calcium phos-
Kurzweg, H., Heimann, R. B., and T. Troczynski. 1998. Adhesion of thermally sprayed hydroxy-
2006. Formation and transformation of amorphous calcium phos-
phates on titanium alloy surfaces during atmospheric plasma spraying and their subsequent in
vitro performance. Biomaterials 27:823-831.
209. Lo, T. N., Chang, E., and T. S. Lui. 2004. Interfacial characterization of porcelain veneered on the
pure titanium under vacuum firing. Mater. Trans . 45:3065-3070.
210. Yang, Y. C. 2007. Influence of residual stress on bonding strength of plasma-sprayed hydroxy-
apatite coating after the vacuum heat treatment. Surf. Coat. Technol . 201:7187-7193.
211. Li, C.-J., Ohmori, A., and R. McPherson. 1997. The relationship between microstructure and
Young's modulus of thermally sprayed ceramic coatings. J. Mater. Sci . 32:997-1004.
212. Kim, H. J., and Y. G. Kweon. 1999. Elastic modulus of plasma-sprayed coatings determined by
indentation and bend tests. Thin Solid Films 342:201-206.
213. Yang, Y. C., Chang, E., and S. Y. Lee. 2003. Mechanical properties and Young's modulus of
plasma-sprayed hydroxyapatite coating on Ti substrate in simulated body fluid. J. Biomed.
Mater. Res. A 67:886-899.
214. Chiang, Y. M., Birnie, D. P., and W. D. Kingery. 1997. Physical Ceramics: Principles for Ceramics
Science and Engineering , 478-484. New York: John Wiley & Sons, Inc.
215. Beshish, G. K., Florey, C. W., Worzala, F. J., and W. J. Lenling. 1993. Fracture toughness of ther-
Heimann, R. B., and R. Wirth. 2006. Formation and transformation of amorphous calcium phos-
Lenling. 1993. Fracture toughness of ther-
mal spray ceramic coatings determined by the indentation technique. J. Thermal Spray Technol .
2:35-38.
W. J. Lenling. 1993. Fracture toughness of ther-
Search WWH ::




Custom Search