References - Rock Mechanics Based on an Anisotropic Jointed Rock Model - page 820

Amadei, B.; Rogers, J. D.; Goodman, R. E.: Elastic constants and tensile strength of anisotropic rocks.
In: Proc. 5 th ISRM Congr., Theme A, Melbourne, 1983.
Amadei, B.; Savage, W. Z.: Anisotropic nature of jointed rock mass strength. J. Eng. Mech. Div. ASCE
115, 525 - 542, 1989.
Amadei, B.; Savage, W. Z.: Analysis of borehole expansion and gallery tests in anisotropic rock masses.
Int. J. Rock Mech. Min. Sci. & Geomech. Abstr. 28, 383 - 396, 1991.
Amadei, B.; Savage, W. Z.: Effect of joints on rock mass strength and deformability. In: Comprehensive
Rock Engineering, Vol. 1, Pergamon Press: Oxford, New York, Seoul, Tokyo, 1993.
Amadei, B.; Stephasson, O.: Rock stress and its measurement. Chapman & Hall: London, 1997.
Amstad, C.; Kovari, K.: Untertagebau in quellfähigem Fels. Vereinigung Schweizerischer Straßenfachleu-
te, Forschungsbericht 482, Zürich, 2001.
Anagnostou, G: Zur Problematik des Tunnelbaus in quellfähigem Gebirge. Mitteilungen der Schweiz.
Ges. für Boden- und Felsmechanik, Heft 154, 2007.
Anagnostou, G.; Cantieni, L.: Design and analysis of yielding support in squeezing ground. In: Proc. 11 th
ISRM Congr., Lisbon 2007.
Anagnostou, G. & Pimentel, E.: Zu den Felsklassifizierungen mit Indexwerten im Tunnelbau. geotechnik
35(2), 83 - 93, 2012.
Anagnostou, G.; Pimentel, E.; Serafeimidis, K.: Swelling of sulphatic claystones - some fundamental
questions and their practical relevance. Geomechanics and Tunneling 3(5), 567 - 572, 2010.
Ashgirei, G. D.: Strukturgeologie. Dtsch. Verl. Wiss.: Berlin, 1963.
Ask, D.: New developments of the integrated stress determination method and application to rock stress
data at the Aspö Hard Rock Laboratory. Doctoral Thesis, Royal Institute of Technology, Stock-
holm, 2004.
Ask, D.: New developments of the integrated stress determination method and application to rock stress
data at the Aspö HRL. Int. J. Rock Mech. Min. Sci. 43, 107 - 126, 2006.
ASTM (American Society for Testing and Materials): Annual topic of standards. Standard test method
for the determination of the in situ stress using the hydraulic fracturing method. Section 4, Vol.
04.08, 851 - 856, 1989.
ASTM (American Society for Testing and Materials): Standard test method for determination of pore
volume and pore volume distribution of soil and rock by mercury intrusion porosimetry. Vol. 04.08:
Soil and Rock, Section 4, D4404-84, 579 - 583, 1998.
Atlas Copco Group: Product information.
Attewell, P. B.; Farmer, I. W.: Principles of engineering geology. Wiley: New York, 1976.
Aubertin, M.; Sgaoulla, J.; Servant, S.; Julien, M. R.; Gill, D. E.; Ladanyi, B.: An up-to-date version of
SUVIC-D for modeling the behavior of salt. In: Proc. 4 th Conf. on the Mechanical Behavior of Salt,
Montreal 1996. Trans. Tech. Publ., Clausthal, 1998.
Aydan, Ö.; Shimizu, Y.; Ichikawa, Y.: The effective failure modes and stability of slopes in rock mass with
two discontinuity sets. Rock Mech. Rock Eng., 22(3), 163 - 188, 1989.
Azuar, J. J.; Panet, M.: Shear behaviour of passive steel in rock mass. Rock bolting, Revue Industrie
Minerale, St. Etienne, 1980.
Azzam, R.; Bock, H.: Recoverable sensor for measurement of tangential strain at borehole walls - a key
component in some innovative borehole instrumentation. In: Proc. Int. Symp. Field Measurements
in Geomechanics, Vol. 1, Kobe, 1987.
Baecher, G. B.: Statistical analysis of rock mass fracturing. J. Math. Geol. 15, 329 - 347, 1983.
Baecher, G. B.; Lanney, N. A.: Trace length biases in joint surveys. In: Proc. 19 th U. S. Symp. Rock Mech.,
Lake Tahoe, Vol. 1, 1978.
Baecher, G. B.; Lanney, N. A.; Einstein, H. H.: Statistical description of rock properties and sampling.
In: Proc. 18 th U. S. Symp. Rock Mech., Keystone, 1977.