References - Rock Mechanics Based on an Anisotropic Jointed Rock Model - page 821

Baghbanan, A.; Jing, L.: Hydraulic properties of fractured rock masses with correlated fracture length
and aperture. Int. J. Rock Mech. Min. Sci. 44, 704 - 719, 2007.
Bai, M.; Elsworth, D.: Modeling of subsidence and stress-dependent hydraulic conductivity for intact and
fractured porous media. Rock Mech. Rock Eng. 27, 209 - 250, 1994.
Balthasar, K.; Wenz, E.: Die Bestimmung des vollständigen Spannungszustandes im Gebirge mit der
Kompensationsmethode. In: Proc. 5 th ISRM Congr., Theme F, Melbourne, 1983.
Bandis, S.: Experimental studies of scale effects on shear strength and deformation of rock joints. Ph.
D. Thesis, University of Leeds, 1980.
Bandis, S.; Barton, N.; Christianson, Y.: Application of a numerical model of joint behaviour to rock
mechanics problems. In: Proc. Int. Symp. Rock Joints, Björkliden, 1985.
Bandis, S.; Lumsden, A. C.; Barton, N.: Fundamentals of rock joint deformation. Int. J. Rock Mech.
Min. Sci. & Geomech. Abstr. 20, 249 - 268, 1983.
Bardsley, W. E.; Major, T. J.; Selby, M. J.: Note on a Weibull property for joint spacing analysis. Int.
J. Rock Mech. Min. Sci. & Geomech. Abstr. 27, 133 - 134, 1990.
Barenblatt, G. E.; Zheltov, I. P.; Kochina, I. N.: Basic concepts in the theory of seepage of homogeneous
liquids in fissured rock. J. Appl. Math. Mech. 24, 1286 - 1303, 1960.
Barla, G.; Barbero, M.; Scavia, C.; Zaninetti, A.: Direct shear testing of single joints under dynamic
loading. In: Proc. ISRM Symp. Rock Joints, Loen, 1990.
Barron, K.: Brittle fracture initiation and ultimate failure of rocks, part III - anisotropic rocks: experi-
mental results. Int. J. Rock Mech. Min. Sci. & Geomech. Abstr. 8, 565 - 575, 1971.
Barton, C. A.; Zoback, M. D.: Self-similar distribution and properties of macroscopic fractures at depth
in crystalline rock in the Cajon Pass scientific drill hole. J. Geophys. Res. 97, 5181 - 5200, 1992.
Barton, C. M.: Analysis of joint traces. In: Proc. 19 th U. S. Symp. Rock Mech., Stateline, 1978.
Barton, N.: Review of a new shear-strength criterion for rock joints. Engineering Geology 7, 287 - 332,
1973.
Barton, N.: Deformation phenomena in jointed rock. Geotechnique 36, 147 - 167, 1986.
Barton, N.: Scale effects or sampling bias? In: Proc. 1 st Int. Workshop on Scale Effects in Rock Masses,
Loen, 1990.
Barton, N.: Some new Q value correlations to assist in site characterization and tunnel design. Int.
J. Rock Mech. Min. Sci. 39, 185 - 216, 2002.
Barton, N.; Bandis, S.: Some effects of scale on the shear strength of joints. Int. J. Rock Mech. Min. Sci.
& Geomech. Abstr. 17, 69 - 73, 1980.
Barton, N.; Bandis, S.: Effects of block size on the shear behaviour of jointed rock. Keynote Lecture. In:
Proc. 23 th U. S. Symp. Rock Mech., Berkeley, 1982.
Barton, N.; Choubey, V.: The shear strength of rock joints in theory and practice. Rock. Mech. 12, 1 - 54,
1977.
Barton, N.; Grimstad, E.: The Q-System following thirty years of development and application in tunnel-
ling projects. In: Proc. ISRM Symp. Eurock 2004, 2004.
Barton, N.; Lien, R.; Lunde, J.: Engineering classification of rock masses for the design of tunnel sup-
port, Norwegian Geotechnical Institute, Publication No. 106, 1974.
Bathe, K. J.; Wilson, E. L.: Numerical methods in finite element analysis. Prentice-Hall: Englewood
Cliffs, 1976.
Bauer, M.: Liquid, non-alkaline accelerators of the latest generation. Tunnel 6, 30 - 38, 2000.
Baumgärtner, J.; Rummel, F.: Experience with fracture pressurization tests as a stress measuring tech-
nique in a jointed rock mass. Int. J. Rock Mech. Min. Sci. & Geomech. Abstr. 26, 661 - 671, 1989.
Bauwer, H.; Rice, R. C.: A slug test for determining hydraulic conductivity of unconfined aquifers with
completely or partially penetrating wells. Water Resour. Res. 1976.
Bear, J.: Dynamics of fluids in porous media. Elsevier: New York, 1972.