References - Rock Mechanics Based on an Anisotropic Jointed Rock Model - page 819

References
Aamodt, R. L.; Kuriyagawa, M.: Measurement of instantaneous shut-in pressure in crystalline rock. In:
Hydraulic Fracturing Stress Measurements. National Academy Press: Washington D. C., 1983.
Abou-Sayed, A. S.; Brechtel, C. E.; Clifton, R.: In situ stress determination by hydrofracturing: a fracture
mechanics approach. J. Geophys. Res. 83, 2851 - 2862, 1978.
Absi, E.; Seguin, M.: Le nouveau geoextensometre. Suppl. Annales de l'Institut Technique du Batiment
et le Travaux Publics, 235 - 236, 1967.
Adler, R.; Fenchel, W.; Pilger, A.: Statistische Methoden in der Tektonik II. Clausthaler Tektonische
Hefte, Vol. 4, 1969.
Afrouz, A. A.: Practical handbook of rock mass classification systems and models of ground failure.
CRC Press: Boca Raton, 1992.
Ahorner, L.: Present-day stress field and seismotectonic block movements along major fault zones in
Central Europe. Tectonophys. 29, 233 - 249, 1975.
Akai K.; Mori, H.: Ein Versuch über Bruchmechanismus von Sandstein unter mehrachsigem Spannungs-
zustand. In: Proc. 2 nd ISRM Congr., Vol. 2, Belgrade, 1970.
Al-Ajmi, A. M.; Zimmermann, R. W.: Relation between the Mogi and the Coulomb failure criteria. Int.
J. Rock Mech. Min. Sci. 42, 431 - 439, 2005.
Alas, M. C.: Dilatometres de sondage. In: Proc. ISRM Symp., Madrid, 1968.
Alber, M.: Incorporation of discontinuity related anisotropy into rock mass classification. Felsbau 19(4),
55 - 60, 2001.
Alber, M.: Stress dependency of the Cerchar abrasivity index (CAI) and its effects on wear of selected
rock cutting tools. Tunn. Undergr. Sp. Tech. 23, 351 - 359, 2008.
Alejano, L. R.; Alonso, E.: Considerations of the dilatancy angle in rocks and rock masses. Int. J. Rock
Mech. Min. Sci. 42, 481 - 507, 2005.
Al-Hussainy, R.; Ramy, H. J.: Application of real gas flow theory to well testing and deliverability fore-
casting. J. Petr. Tech. 18(5), 637 - 642, 1966.
Alonso, E. E.; Olivella, S.: Modelling tunnel performance in expansive gypsum claystones. In: Proc. 12 th
Int. Conf. of Int. Association for Computer Methods and Advances in Geomechanics (IACMAG),
Goa, 2008.
Alonso, E. E.; Ramon, A.: El tunel de Lilla. In: Proc. Jornada Tecnica sobre Tuneles en Terrenos Salinos
y Expansivos, Barcelona, 2011.
Amadei, B.: Rock anisotropy and the theory of stress measurements. Lecture Notes in Engineering,
Vol. 2, Springer: Berlin, New York, 1983.
Amadei, B.: Application of the theory of hollow inclusions for overcoring stress measurements in rock.
Rock Mech. Rock Eng. 18, 107 - 130, 1985.
Amadei, B.: Importance of anisotropy when estimating and measuring in situ stresses in rock.
Int. J. Rock Mech. Min. Sci. & Geomech. Abstr. 33, 293 - 325, 1996.
Amadei B.; Goodman, R. E.: The influence of rock anisotropy on stress measurements by overcoring
techniques. Rock Mech. 15, 167 - 180, 1982.
Amadei, B.; Pan, E.: Gravitational stresses in anisotropic rock masses with inclined strata. Int. J. Rock
Mech. Min. Sci. & Geomech. Abstr. 29, 225 - 236, 1992.