Graphics Programs Reference
In-Depth Information
Figure 17.29
Sketching the sweep
Figure17.30
Edit Profile button
14. From the Draw panel, select the Center-Ends Arc drawing tool and use
the origin point of the path for the center of the arc. Using the top end
point of the base extrusion as the radius length, draw the arc through 90
degrees. Complete the profile with two straight lines.
15. Click the green check mark button on the Mode panel twice to complete
the creation of the sweep. Open the default {3D} view to display the
completed form, as shown in
Figure 17.31
.
Figure 17.31
Completed form
