Graphics Programs Reference
In-Depth Information
Figure 3-69
Figure 3-70: The final bowl with a smooth surface.
this process again, moving the points
and sizing them so that they're not
poking through the outside polys of the
bowl. Continue this process several
more times until you've reached the
bottom of the bowl.
6.
With the edge points still selected,
click on the
Extender Plus
tool again.
Then activate the
Move
tool. Holding
the <
Ctrl
> key down (or using the
middle mouse button), drag down
slightly to form the initial inside edge
of the bowl.
8.
Finally, click on
Extender Plus
once
more. Click on the
Weld Average
tool
from the
Detail | Points
menu. This
will weld all of the points together at
their averaged center.
7.
Click on the
Extender Plus
tool again,
followed by the
Move
tool. Move the
new edge down slightly. Then use the
Size
tool to shrink the selection so that
the points are inside the bowl. Repeat
