Graphics Programs Reference
In-Depth Information
6.
Click
Size Dimension
in the tree.
On this page, you can define the default tolerance values to be added to the DimXpert size
dimensions. You can specify three types of the tolerances (Symmetric, Bilateral, and Gen-
eral) for various types of features. The tolerances can be specified separately for each fea-
ture.
7.
Click
Location Dimension
in the tree.
On this page, you can define the default tolerance values for the location dimensions. In
addition, you can set the type of the dimensions to be added to inclined planes using the
Auto Dimension Scheme
.
8.
Click
Chain Dimension
in the tree.
On this page, you can define the dimensioning method for holes and pockets using the
Auto Dimension Scheme
. In addition, you can define the tolerances for patterns.
9.
Click
Geometric Tolerance
in the tree.
This page allows you to set the default options for geometric tolerances to be added using
the
Auto Dimension Scheme
.
Likewise, you can set the default width and tolerance settings on the
Chamfer Control
page.
10.
Click
Display Options
on the tree.
This page allows you to control the way the dimensions and tolerances are displayed using
the
Auto Dimension Scheme
. In addition, you can control the redundant dimensions and
tolerances using
Eliminate duplicates
and
Show instance count
options.
11.
Click
OK
to close the dialog.
Chapter 2: Appearances and Rendering
