Graphics Programs Reference
In-Depth Information
TUTORIAL 5 (DimXpert Options)
1.
Start a new Part document.
2.
On the Quick Access Toolbar, click
Options
to the
System Options
dialog.
3.
Click the
Document Properties
tab and select
Drafting Standard
from the
tree.
4.
Set the
Overall drafting standard
to
ISO
.
5.
Click
DimXpert
in the tree.
The
Method
is set to
General Tolerance
. You can define the
Tolerance class
as Fine, Me-
dium, Coarse, or Very Coarse.
The
Block Tolerance
method can be used, if you are using the ANSI drafting standard.
You can define the decimal values for the length and angle dimensions in the
Block toler-
ance
section.