CHATTER AND BURR FORMATION IN THE DRILLING OF MEDICAL MATERIALS - Medical Device Manufacturing - page 72

[11] Fujii, H., Marui, E., Ema, S., Whirling Vibration in Drilling. Part 2:
Influence of Drill Geometries, Particularly of the Drill Flank on the
Initiation of Vibration. ASME Journal of Engineering Industry, 1986.
108(3): p. 163.
[12] Bayly, P.V., Lamar, M.T., Calvert, S.G., Low-Frequency Regenerative
Vibration and the Formation of Lobed Holes in Drilling. Journal of
Manufacturing Science and Engineering, 2002. 124: p. 275-285.
[13] Altintas, Y., Weck, M., Chatter Stability of Metal Cutting and Grinding.
CIRP Annals - Manufacturing Technology, 2004. 53(2): p. 619-642
[14] Tlusty, J., The dynamics of high-speed milling. Journal of Engineering
for Industry, 1986. 108: p. 50-67.
[15] Stone, E., Askari, A., Nonlinear models of chatter in drilling processes.
Dynamical systems, 2002. 17(1): p. 65-85.
[16] Stone, E., Campbell, S.A., , Stability and Bifurcation Analysis of a
Nonlinear DDE Model for Drilling. Journal of Nonlinear Science 2004.
14: p. 27-57.
[17] Campbell, S.A., Stone, E. , Analysis of Chatter Instability in a Nonlinear
Model for Drilling. Journal of Computational and Nonlinear Dynamics,
2006. 1: p. 294-306
[18] Dilley, D.N., Bayly, P.V., Schaut, A.J. , Effects of the chisel edge on the
chatter frequency in drilling. Journal of Sound and Vibration, 2005. 281:
p. 423-438.
[19] Dilley, D.N., Stephenson, D. A., Bayly, P.V., Schaut, A.J., Frequency
Shift in Drilling Due To Margin Engagement. Journal of Manufacturing
Science and Engineering, 2005. 127: p. 271-276.
[20] Arvajeh, T., Ismail, F., Machining stability in high-speed drilling—Part
1: Modeling vibration stability in bending. International Journal of
Machine Tools and Manufacture, 2006. 46: p. 1563-1572.
[21] Ulsoy, A.G., A lumped parameter model for the transverse vibration of
the drill bits. Control of Manufacturing Processes and Robotic Systems,
1983: p. 15-25.
[22] Ema, S., Fujii, H., Marui, E. , Chatter vibration in drilling. Journal of
Engineering for industry, 1988. 110: p. 309-314
[23] Rincon, D.M., Coupled force and vibration modeling of drills with
complex cross sectional geometries , in Department of Mechanical
Engineering and Applied Mechanics . 1993, University of Michigan:
Michigan.
[24] Arvajeh, T., Ismail, F., Machining stability in high speed drilling—Part
2: Time domain simulation of a bending-torsional model and