CHATTER AND BURR FORMATION IN THE DRILLING OF MEDICAL MATERIALS - Medical Device Manufacturing - page 73

experimental validations. International Journal of Machine Tools and
Manufacture 2006. 46: p. 1573-1581.
[25] Roukema, J.C., Altintas, Y. , Generalized modeling of drilling
vibrations. Part II: Chatter stability in frequency domain. International
Journal of Machine Tools and Manufacture 2007. 47: p. 1474-1485.
[26] Rincon, D.M., Usloy, A.J., Complex geometry, rotary inertia and
gyroscopic moment effects on drill vibration. Journal of Sound and
Vibration , 1994. 188: p. 701-715.
[27] Timoshenko, S., Young, D.H., Weaver , W., Vibration Problems in
Engineering . 1974, New York: John Willey and Sons, Inc.
[28] Altintas, Y., Chan, P.K., In-process detection and suppression of chatter
n milling. International Journal of Machine Tools and Manufacture ,
1990. 32(3): p. 329-347.
[29] Inamura T., S., T., Stability analysis of cutting under varying spindle
speed. Annals of the CIRP , 1974. 23(1): p. 119-120.
[30] Li, C.J., Ulsoy, A.G., Endres, W.J., The effect of spindle speed variation
of chatter suppression in rotating tool machining. Materials Science
Forum , 2006. 505-507: p. 859-864.
[31] Radulescu, R., Kapoor, S.G., DeVor, R.E., An investigatino of Variable
Spindle Speed Face Milling for Tool-Work Structures With Complex
Dynamics, Part2: Physical Explanations. Journal of Manufacturing
Science and Engineering, 1997. 119: p. 273-279.
[32] Sastry, S., Kapoor, S.G., DeVor, R.E., Compensation of progressive
radial run-out in face-milling by spindle speed variation International
Journal of Machine Tools and Manufacture, 2000. 40: p. 1121-1139.
[33] Smith, S., Tlusty, J, Update on high-speed milling dynamics. ASME
Journal of Engineering for Industry , 1990. 112: p. 142-149.
[34] Smith, S., Delio, T., Sensor-based chatter detection and avoidance by
spindle speed selection. ASME Journal of Dynamic Systems,

Measurement, and Control , 1992. 114: p. 486-492.
[35] Takemura, T., Kitamura, T., Hoshi, T., Active suppression of chatter by
programmed variation of spindle speed. Journal of the Japan Society of
Precision Engineering, 1974. 42(11): p. 1049-1055.
[36] Tsao, T., McCarthy, M.W., Kapoor, S.G., A new approach to stability
analysis of variable speed machining sistems. International Journal of
Machine Tools and Manufacture, 1992. 33(6): p. 791-808.
[37] Smith, S., Tlusty, J., Efficient simulation programs for chatter in milling.
Annals of the CIRP , 1993. 42(1): p. 463-466.