Blade materials, testing methods and structural design - Wind Power Generation and Wind Turbine Design - page 464

[60] Hashin, Z., Failure criteria for unidirectional fi ber composites. Journal of

Applied Mechanics , 47 , pp. 329-334, 1980.
Puck, A. & Schürmann, H., Failure analysis of FRP laminates by means [61]

of physically based phenomenological models. Composite Science and
Technology , 58 , pp. 1045-1067, 1998.
Parvizi, A., Garrett, K.W. & Bailey, J.E., Constrained cracking in glass fi -

[62]

bre-reinforced epoxy cross-ply laminates. Journal of Materials Science , 13 ,
pp. 195-201, 1978.
Aveston, J. & Kelly, A., Tensile fi rst cracking strain and strength of hybrid [63]

composites and laminates. Philosophical Transactions of the Royal Society
of London , A294 , pp. 519-534, 1980.
Ho, S. & Suo, Z., Tunneling cracks in constrained layers. [64] Journal of Applied

Mechanics , 60 , pp. 890-894, 1993.
Abrate, S., Impact on laminated composite materials. [65] Applied Mechanical

Review , 44 , pp. 155-190, 1991.
Pavier, M.J. & Clarke, M.P., Experimental techniques for the investigation [66]

of the effects of impact damage on carbon fi bre composites. Composites
Science & Technology , 55 , pp. 157-169, 1995.
Peck, S.O. & Springer, G.S., The behaviour of delaminations in composite [67]

plates - analytical and experimental results. Journal of Composite Materials ,
25 , pp. 907-929, 1991.
Short, G.J., Guild, F.J. & Pavier, M.J., The effect of delamination geometry [68]

on the compressive failure of composite laminates. Composites Science and
Technology , 61 , pp. 2075-2086, 2001.
Karihaloo, B.L. & Stang, H., Buckling-driven delamination growth in com-

[69]

posite laminates: guidelines for assessing the threat posed by an interlaminar
delamination. Composites Part B , 39 , pp. 386-395, 2008.
Sørensen, B.F., Goutianos, S. & Jacobsen, T.K., Strength scaling of adhe- [70]

sive joints in polymer-matrix composites. International Journal of Solids &
Structures , 46 , pp. 741-761, 2009.
Holmes, J.W., Sørensen, B.F., Brøndsted, P. & Liu, L., Wind turbine blades:

[71]

analysis of adhesively bonded laminates, Global Wind Power 2008 , Beijing,
China, 2008.
Holmes, J.W., Rasmussen, U.R., Sørensen, B.F. & Brøndsted, P., Experimen- [72]

tal technique for mixed-mode cyclic crack growth testing of composite lami-
nates. Engineering Fracture Mechanics , manuscript in preparation, 2010.
Nilsson, K.F., Asp, L.E., Alpman, J.E. & Nystedt, L., Delamination buckling [73]

& growth for delaminations at different depths in a slender composite panel.
International Journal of Solids & Structures , 38 , pp. 3039-3071, 2001.
Short, G.J., Guild, F.J. & Pavier, M.J., Delaminations in fl at and curved com-

[74]

posite laminates subjected to compressive load. Composite Structures , 58 ,
pp. 249-258, 2002.
Wang, X.W., Pont-Lezica, I., Harris, J.M., Guild, F.J. & Pavier, M.J., Com- [75]

pressive failure of composite laminates containing multiple delaminations.
Composites Science and Technology , 65 , pp. 191-200, 2005.