Blade materials, testing methods and structural design - Wind Power Generation and Wind Turbine Design - page 465

[76] Branner, K., Jensen, F.M., Berring, P., Puri, A., Morris, A. & Dear, J., Effect

of sandwich core properties on ultimate strength of a wind turbine blade.
Proceedings of the 8th International Conference on Sandwich Structures ,
University of Porto, Portugal, 2008.
Jensen, F.M., Weaver, P.M., Cecchini, L.S., Stang, H. & Nielsen, R.F., The

[77]

Brazier effect in wind-turbine blades and its infl uence on design. Strain ,
accepted, 2009.
Branner, K., Modelling failure in cross-section of wind turbine blade. [78]

Proceedings of the. NAFEMS-Seminar: Prediction and Modelling of Failure
Using FEA , Risø National Laboratory, Denmark, 2006.
Kühlmeier, L., Buckling of wind turbine rotor blades. Analysis, design

[79]

and experimental validation. PhD-Thesis. Special Report No. 58, Aalborg
University, Denmark, 2007.
Kühlmeier, L., Thomsen, O.T. & Lund, E., Large scale buckling experiment [80]

and validation of predictive capabilities. 15th International Conference on
Composite Materials (ICCM-15) , Durban, South Africa, 2005.
Overgaard, L. & Lund, E., Structural design sensitivity analysis and opti- [81]

mization of Vestas V52 wind turbine blade. Proceedings of the 6th World
Congress on Structural and Multidisciplinary Optimization , 2005.
Jørgensen, E.R., Borum, K.K., McGugan, M., Thomsen, C.L., Jensen, F.M.,

[82]

Debel, C.P. & Sørensen, B.F., Full scale testing of wind turbine blade to
failure - fl apwise loading. Risø-R-1392(EN), p. 28, 2004.
Berggreen, C., Branner, K., Jensen, J.F. & Schultz, J.P., Application & [83]

analysis of sandwich elements in the primary structure of large wind turbine
blades. Journal of Sandwich Structures & Materials , 9 , pp. 525-552, 2007.
Overgaard, L. & Lund, E., Damage analysis of a wind turbine blade.

[84] Pro-

ceedings of the ECCOMAS thematic Conference on Mechanical Response of
Composites , Portugal, 2007.
Overgaard, L. & Lund, E., Interdisciplinary damage & stability analysis of [85]

a wind turbine blade. Proceedings of the 16th International Conference on
Composite Materials , Japan, 2007.