Blade materials, testing methods and structural design - Wind Power Generation and Wind Turbine Design - page 463

[42] Brøndsted, P., Lilholt, H. & Lystrup, Aa., Composite materials for wind

power turbine blades. Annual Review of Materials Research , 35 , pp. 505-538,
2005.
Paris, P. & Erdogan, F., A critical analysis of crack propagation laws. [43] Journal

of Basic Engineering, Series D , 85 , pp. 528-534, 1963.
Kenane, M. & Benzeggagh, M.L., Mixed-mode delamination fracture [44]

toughness of unidirectional glass/epoxy composites under fatigue loading.
Composite Science and Technology , 57 , pp. 597-605, 1997.
McMeeking, R.M. & Evans, A.G., Matrix fatigue cracking in fi ber compos- [45]

ites. Mechanics of Materials , 9 , pp. 217-227, 1990.
Cox, B.N., Scaling for bridged cracks. [46] Mechanics of Materials , 15 , pp. 87-98,

1993.
Sørensen, B.F. & Jacobsen, T.K., Crack bridging in composites: connect- [47]

ing mechanisms, micromechanics and macroscopic models. In: Proceed-
ings of the International Conference on New Challenges in Mesomechan-
ics (Mesomechanics 2002) , eds R. Pyrz, J. Schjødt-Thomsen, J.C. Rauhe,
T. Thomsen & L.R. Jensen, Aalborg University: Denmark, pp. 599-604,
2002.
DNV/Risø, [48] Guidelines for Design of Wind Turbines , 2nd Edition, DNV/Risø

Publication: Denmark, 2002.
Brazier, L.G., On the fl exure of thin cylindrical shells & other thin sections.

[49]

Proceedings of the Royal Society London , A 116 , pp. 104-114, 1927.
Krenk, S., A linear theory for pretwisted elastic beams. [50] Journal of Applied

Mechanics , 50 , pp. 137-142, 1983.
Krenk, S. & Gunneskov, O., Pretwist and shear fl exibility in vibration of

[51]

turbine blades. Journal of Applied Mechanics , 52 , pp. 409-415, 1985.
Krenk, S., The torsion-extension coupling in pretwisted elastic beams. [52] Inter-

national Journal of Solids & Structures , 19 , pp. 67-72, 1985.
Krenk, S. & Jeppesen, B., Finite elements for beam cross sections of moder- [53]

ate wall thickness. Computers and Structures , 32 , pp. 1035-1043, 1985.
Hodges, D.H., Nonlinear composite beam theory. [54] Progress in Astronautics &

Aeronautics , 213 , AIAA : Virginia, USA, 2006.
Madsen, H.A. (ed), [55] Research in Aeroelasticity - EFP-98 (in Danish). Risø-

R-1129(DA), Risø National Laboratory, Roskilde, Denmark, 1999.
Larsen, G.C., Modal analysis of wind turbine blades. Risø-R-1181(EN), Risø

[56]

National Laboratory, Roskilde, Denmark, 2002.
Laird, D.L., Montoya, F.C. & Malcolm, D.J., Finite element modeling of [57]

wind turbine blades. Proceedings of AIAA/ASME Wind Energy Symposium ,
Reno, Nevada, USA, AIAA-2005-0195, pp. 9-17, 2005.
Branner K., Berring P., Berggreen C. & Knudsen H.W., Torsional perfor-

[58]

mance of wind turbine blades - part II: Numerical validation. Proceedings
of the 16th International Conference of Composite Materials , Kyoto, Japan,
2007.
Hull, D. & Clyne, T.W., [59] An Introduction to Composite Materials , Cambridge

University Press, 1996.