Rendering the Enforcer - ZBrush Creature Design: Creating Dynamic Concept Imagery for Film and Games - page 668

8. Set the Stroke Type to spray and, from the Alpha palette, choose Alpha 40, which is a tiny dot. In the
Stroke palette, set the Placement to 1 and Scale to 0. This increases the distance between each dot in the
spray stroke and removes variation in the scale of each dot. The brush will be used to spray small dots of
the enforcerSkinWet material on the surface. Turn off LazyMouse.
9. On the top shelf, turn off Zadd and Rgb and turn on M. This ensures that only material information is
painted on the surface and the colors and surface are not disturbed.
10. Finally, before you start painting the material, you will create a cavity mask so that the enforcerSk-
inWet material is applied only to the very surface and not in the wrinkles and crevices on the surface.
Expand the Masking subpalette of the Tool palette and set the Intensity slider below the Cavity asking
button to 100. Adjust the edit curve for the cavity mask so it looks like Figure 10-23 .
Figure 10-23: Edit the Cavity Profile curve so that it looks like this image