Agriculture Reference
In-Depth Information
2.
They are complete, with a high level of resolution. A sufficient level of detail
is provided to clearly communicate the design intent, so that the reader or
reviewer has few if any questions as to what is intended.
3.
They are organized in a consistent, accessible, and intelligible manner. There
is an obvious organizational system that has been followed in presenting the
information, in both graphic and written form, particularly for complex projects
involving countless pages of drawings for a myriad of contributing consultants.
4.
The information is presented in a predictable and consistent location. Every-
thing has its place so that those looking for information know where to find
what they are looking for on a page.
5.
Information is organized using a hierarchical system. Drawing-line weights
should be hierarchical, with heavier or darker lines assigned to the primary
form or information, and lighter line weights used for more detailed infor-
mation. The main subject items in text or drawings on the page should be
the primary focus, with detailed or supporting information presented in
smaller case or lighter line weights.
6.
They utilize standard nomenclature and graphic standards in general use
within the industry and design disciplines.
7.
They are reviewed following a standard process of quality control imple-
mented by the organization (firm, department, organization) and the need
for following this process is understood by all staff within the organization.
8.
All plan drawings in a documentation package are positioned with the same
north orientation to the extent feasible. This will minimize confusion and
reduce misjudgment. A corollary to this is that all drawing should have a scale.
another Word aBout ScaLe
The word “scale,” as used in map reading and landscape documentation,
refers to the relationship between the distance or horizontal dimensions
on a map and the dimensions or distance in the actual landscape. Topo-
graphic and land survey maps almost always use an engineer's scale.
The units of measurement are expressed in whole numbers and decimal
fractions. For example, forty-two and a half feet is written as 42.5 feet.
