Advances in Seismic Design Methodologies - Earthquake Engineering for Structural Design - page 449

Advances in Seismic Design Methodologies 449

Oliveto, G., Marletta, M. (2005): Seismic retrofitting of reinforced concrete
buildings using traditional and innovative techniques.

Journal of Earthquake

Technology, Vol. 42, No. 2-3, 21-46
Papanikolaou, V.K., Elnashai, A.S., Pareja, J.F. (2005): Limits of applicability of
conventional and adaptive pushover analysis for seismic response assessment. Report
of University of Illinois at Urbana-Champaign
http://mae.cee.edu/documents/cd_rom_series/05-02/Report 05-02.pdf
Pinho, R. (2007): Analisi pushover adattiva in spostamento. ANIDIS 2007, XII
Convegno L'Ingegneria Sismica in Italia, Pisa, 10-14 June 2007
Pinho, R., Antoniou, S., Casarotti, C., Lopez, M. (2005): A deplacement-based
adaptive pushover for assessment of buildings and bridges. Seismic Assesment and
rehabilitation of existing buildings, Istanbul, 30 May-1 June 2005
Pinho, R., Antoniou, S., Pietra, D. (2006): A displacement-based adaptive pushover
for seismic assessment of steel and reinforced concrete buildings. 8 th US National
Conference in Earthquake Engineering, San Francisco, 17-21 April 2006, Paper No.
1701
Poland, C.D., Hom, D.B. (1997): Opportunities and pitfalls of performance based
seismic engineering. In Seismic Design Methodologies in the Next Generation of
Codes, Bled, 24-27 June 1997, Balkema, Rotterdam, 69-78
Priestley, M.J.N. (1997): Displacement-based seismic assessment of reinforced
concrete buildings. Journal of Earthquake Engineering, Vol. 1, No. 1, 157-192
Sabetta, F., Bommer, J. (2002): Modification of the spectral shapes and subsoil
conditions in Eurocode 8. 12

th

European Conference on Earthquake Engineering,
London, 9-13 September 2002, Paper No. 518
SEAOC, Structural Engineering Association of California (1995): Vision 2000 - A
framework for performance based engineering. Vision 2000 Committee, Sacramento,
California
Studer, J., Koller, M.G. (1994): Design earthquake: The importance of engineering
judgements. 10

th

European Conference on Earthquake Engineering, Vienna, 28August -
2 September 1994, Balkema, Rotterdam, 167-176
Tirca, L, Gioncu, V., Mazzolani, F.M. (1997): Influence of design criteria for multi-
story steel MR frames. Behavior of Steel Structures in Seismic Areas, STESSA 97
(eds. F.M. Mazzolani and H. Akiyama), Kyoto, 3-8 August 1997, 10/17 Salerno, 266-
275
Tolis, S.V., Faccioli, E. (1999): Displacement design spectra. Journal of Earthquake
Engineering, Vol. 3, No. 1, 107-125
Truta, M., Mosoarca, M., Gioncu, V., Anastasiadis, A. (2003): Optimal design of
steel structures for multi-level criteria. Behavior of Steel Structures in Seismic Areas,
STESSA 2003 (ed. F.M. Mazzolani). Naples, 9-12 June 2003, Balkema, Lisse, 63-69
Turker, K., Irtem, E. (2006): An effective multi-modal and adaptive pushover
procedure for buildings. Bulletin of the Istanbul Technical University, Vol. 54, No. 5,
34-45