Advances in Seismic Design Methodologies - Earthquake Engineering for Structural Design - page 448

448 Earthquake Engineering for Structural Design

King , A. (2000): Earthquake Loads & Earthquake Resistant Design of Buildings.
Building Research Association of New Zeeland (BRANZ) Report
Kim, S., D'Amore, E. (1999): Push-over analysis procedure in earthquake
engineering. Earthquake Spectra, Vol. 15, No. 3, 417-434
Krawinkler, H. (1996): A few basic concepts for performance based seismic design.
In 11 th World Conference on Earthquake Engineering, Acapulco, 23-28 June 1996,
Paper No. 1133
Krawinkler, H. (1997): Research issue in performance based seismic engineering. In
Seismic Design Methodologies for the Next Generation of Codes (eds. P. Fajfar and
H. Krawinkler), Bled, 24-27 June 1997, Balkema, Rotterdam, 47-58
Krawinkler, H. (1999): Challenges and progresses in performance-based earthquake
engineering. In International Seminar on Seismic Engineering for Tomorrow. Tokyo,
26 November 1999
Krawinkler, H., Seneviratna, G.D.P.K. (1998): Pros and cons of pushover analysis
of seismic performance evaluation. Engineering Structures, Vol. 20, Nos. 4-6, 452-464
Lam, N., Wilson, J., Hutchinson, G. (1996): Building ductility demand: Interplate
versus intraplate earthquakes. Earthquake Engineering and Structural Dynamics, Vol.
27, 749-746
Lawson, R.S., Vance, V., Krawinkler, H. (1994): Non-linear static push-over
analysis - why, when and how? 5

th

US National Conference on Earthquake

Engineering, Vol. 1, 283-292
Lee, S (2008): Non-linear dynamic earthquake analysis of skyscrapers. 8

th

World
Congress of Council on Tall Buildings and Urban Habitat, Dubai, 3-5 March 2008
Lee, T.H., Kato, T., Matsumiya, T., Suita, K., Nakashima, M. (2006): Seismic
performance evaluation of nonstructural components: drywall partitions. Annals of
Disasater Prevention, Research Institute , Kyoto University, No. 49, 177-188
Mazzolani, F.M., Piluso, V. (1993): Design of steel structures in seismic zones.
ECCS Manual, TC13, Seismic Design Report
Mazzolani, F.M., Piluso, V. (1996): Theory and Design of Seismic Resistant Steel
Frames. E&FN Spon, London
Medhekar, M.S., Kennedy, D.J.L. (2000): Displacement-based seismic design of
buildings. Part 1: Theory; Part 2: Application Engineering Structures, Vol. 22, 201-
209, 210-221
Mwafy, A.M., Elnashai, A.S. (2001): Static pushover versus dynamic collapse
analysis of RC buildings. Engineering Structures, Vol. 23, No. 5, 407-424
NEHRP (2003): Structural design criteria. Chapter 4, Commentary
http://www.bssconline.org/NEHRP2003/C4.pdf
NISEE (1997): Non-structural components. In Guidelines for Achieving Efficient
Seismic-Resistant Design. National Information Service for Earthquake Engineering,
University of California, Berkely