Biomedical Engineering Reference
In-Depth Information
Ibrahim I A, Mohamed F A, and Lavernia E J (1991), Particulate reinforced metal
matrix composites—a review, Journal of Materials Science, 26, 1137-1156.
Kelly A (1985), Composites in context, Composites Science and Technology, 23, 171-
199.
Kim K T, Cha S I, and Hong S H (2007), Hardness and wear resistance of carbon
nanotube reinforced Cu matrix nanocomposites, Materials Science and
Engineering: A, 449-451(25), 46-50.
Laha T, Agarwal A, McKechnie T, and Seal S (2004), Synthesis and characterization
of plasma spray formed carbon nanotube reinforced aluminum composite,
Materials Science and Engineering: A, 381, 249-258.
Laha T, Chen Y, Lahiri D, and Agarwal A (2009), Tensile properties of carbon
nanotube reinforced aluminum nanocomposite fabricated by plasma spray
forming, Composites Part A: Applied Science and Manufacturing, 40(5), 589-
594.
Lan J, Yang Y, and Li X C (2004), Microstructure and microhardness of SiC
nanoparticles reinforced magnesium composites fabricated by ultrasonic
method, Materials Science and Engineering A, 386, 284-290.
Lee C J, Huang J C, and Hsieh P J (2006), Mg based nano-composites fabricated by
friction stir processing, Scripta Materialia, 54(7), 1415-1420.
Li X, Duan Z, Cao G, and Roure A (2007), Ultrasonic cavitation based solidification
processing of bulk Mg matrix nanocomposite, Schaumburg, IL, American
Foundry Society.
Li X C, Yang Y, and Cheng X D (2004), Ultrasonic-assisted fabrication of metal
matrix nanocomposites, Journal of Materials Science, 39, 3211-3212.
Li Y, Zhao Y H, Ortalan V, Liu W, Zhang Z H, Vogt R G, Browning N D, Lavernia
E J, and Schoenung J M (2009), Investigation of aluminum-based
nanocomposites with ultra-high strength, Materials Science and Engineering:
A, 527(1-2), 305-316.
Ma Z Y, Li Y L, Liang Y, Zheng F, Bi J, and Tjong S C (1996), Nanometric Si
3
N
4
particulate-reinforced aluminum composite, Materials Science and Engineering:
A, 219(1-2), 229-231.
Mazaheri Y, Karimzadeh F, and Enayati M H (2011), A novel technique for
development of A356/Al
2
O
3
surface nanocomposite by friction stir processing,
Journal of Materials Processing Technology, 211(10), 1614-1619.
Motta M S, Brocchi E A, Solorzano I G, and Jena P K (2004), Complementary
Microscopy Techniques Applied to the Characterization of Cu-Al2O3
Nanocomposites, Spain: Formatex Research Centre. Available from: http://
www.formatex.org/microscopy2/papers/215-223.pdf [Accessed Feb 10 2012].
Neubauer E, Kitzmantel M, Hulman M, and Angerer P (2010), Potential and
challenges of metal-matrix-composites reinforced with carbon nanofibers and
carbon nanotubes, Composites Science and Technology, 70(16), 2228-2236.
Nie K B, Wang X J, Xu L, Wu K, Hu X S, and Zheng M Y (2011), Microstructure
and mechanical properties of SiC nanoparticles reinforced magnesium matrix
composites
fabricated by ultrasonic
vibration, Materials Science
and
Engineering: A, 528(15), 5278-5282.
Nouri N, Ziaei-Rad S, Adibi S, and Karimzadeh F (2012), Fabrication and
mechanical property prediction of carbon nanotube reinforced aluminum
nanocomposites, Materials and Design, 34, 1-14.
