Biomedical Engineering Reference
In-Depth Information
Cao G, Konishi H, and Li X (2008a), Mechanical properties and microstructure of
Mg/SiC nanocomposites fabricated by ultrasonic cavitation based
nanomanufacturing, Journal of Manufacturing Science Engineering, 130(3),
031105-1-031105-6.
Cao G, Choi H, Oportus J, Konishi H, and Li X (2008b), Study on tensile properties
and microstructure of cast AZ91D/AlN nanocomposites, Materials Science and
Engineering: A, 494(25), 127-131.
Choi H J, Shin J H, and Bae D H (2011), Grain size effect on the strengthening
behavior of aluminum-based composites containing multi-walled carbon
nanotubes, Composites Science and Technology, 71, 1699-1705.
Daoush W M, Lim B K, Mo C B, Nam D H, and Hong S H (2009), Electrical and
mechanical properties of carbon nanotube reinforced copper nanocomposites
fabricated by electroless deposition process, Materials Science and Engineering:
A, 513-514, 247-253.
Davis E A, and Ward I M (1993), An introduction to metal matrix composites,
London, Cambridge University Press.
Fathy A, Shehata F, Abdelhameed M, and Elmahdy M (2011), Compressive and
wear resistance of nanometric alumina reinforced copper matrix composites,
Materials & Design, DOI: 10.1016/j.matdes.2011.10.021.
Ferkel H, and Mordike B L (2001), Magnesium strengthened by SiC nanoparticles,
Materials Science and Engineering A, 298, 193-199.
Goussous S, Xu W, Wu X, and Xia K (2009), Al-C nanocomposites consolidated by
back pressure equal channel angular pressing, Composites Science and
Technology, 69(11-12), 1997-2001.
Gupta M, and Wong W L E (2005), Enhancing overall mechanical performance of
metallic materials using two-directional microwave assisted rapid sintering,
Scripta Materialia, 52, 479-485.
Hashim J, Looney L, and Hashmi M S J (2001a), The wettability of SiC particles by
molten aluminium alloy, Journal of Materials Processing Technology, 119(20),
324-328.
Hashim J, Looney L, and Hashmi M S J (2001b), The enhancement of wettability of
SiC particles in cast aluminium matrix composites, Journal of Materials
Processing Technology, 119(20), 329-335.
Hassan S F (2011), Effect of primary processing techniques on the microstructure
and mechanical properties of nano-Y2O3 reinforced magnesium
nanocomposites, Materials Science and Engineering: A, 528(16-17), 5484-5490.
Hassan S F, Tana M J, and Gupta M (2008), High-temperature tensile properties of
Mg/Al
2
O
3
nanocomposite, Materials Science and Engineering: A, 486(1-2), 56-
62.
He J, Zhao N, Shi C, Du X, Li J, and Nash P (2008), Reinforcing copper matrix
composites through molecular-level mixing of functionalized nanodiamond by
co-deposition route, Materials Science and Engineering: A, 490(1-2), 293-299.
Hosseini N, Karimzadeh F, Abbasi M H, and Enayati M H (2010), Tribological
properties of Al6061-Al2O3 nanocomposite prepared by milling and hot
pressing, Materials & Design, 31(10), 4777-4785.
Hsu C J, Chang C Y, Kao P W, Ho N J, and Chang C P (2006), Al-Al
3
Ti
nanocomposites produced in situ by friction stir processing, Acta Materialia, 54,
5241-5249.
