Biomedical Engineering Reference
In-Depth Information
management framework for designing multiphase materials. ASME J. Mech.
Des., 2007, 130: 091702-1-13.
6. Mejia-Rodriguez, G., Renaud, J.E., and Tomar V., A methodology for
multiscale computational design of continuous fiber SiC-Si
3
N
4
ceramic
composites based on the variable fidelity model management framework. 3rd
AIAA Multidisciplinary Design Optimization Specialist Conference, Honolulu,
Hawaii, 2007.
7. Besson, J.L., Mayne, M., Bahloul-Hourlier, D., and Goursat, P.,
Nanocomposites Si
3
N
4
-SiCN: Influence of SiC nanocomposites on the creep
behavior. Key Engg. Mater., 1997, 132-136: 1970-1973.
8. Buljan, S.T., Baldoni, J.C., and Huckabee, M.L., Si
3
N
4
-SiC composites. Am.
Ceram. Soc. Bull., 1987, 66(2): 347-352.
9. Chedda, M.S., Flinn, B.D., Leckie, R., and Bordia, R.K., Effect of sub-micron
sized reinforcements on the high temperature behavior of Si
3
N
4
composites.
Ceram. Trans., 2000, 103: 223-236.
10. Lange, F.F., Effect of microstructure on strength of Si
3
N
4
-SiC composite
system. J. Am. Ceram. Soc., 1973, 56(9): 445-450.
11. Niihara, K., Izaki, K., and Kawakami, T., Hot-Pressed Si
3
N
4
-32%SiC
nanocomposites from amorphous Si-C-N powder with improved strength
above 1200
8
C. J. Mater. Sci. Lett., 1990, 10: 112-114.
12. Rendtel, A., Hubner, H., Herrman, M., and Schubert, C., Silicon nitride/silicon
carbide nanocomposite materials: II, hot strength, creep, and oxidation
resistance. J. Am. Ceram. Soc., 1998, 81(5): 1109-1120.
13. Sternitzke, M., Review: Structural ceramic nanocomposites. J. Eur. Ceram.
Soc., 1997, 17: 1061-1082.
14. Wan, J., Duan, R.-G., Gasch, M.J., and Mukherjee, A.K., Highly creep-
resistant silicon nitride/silicon carbide nano-nano composites. J. Am. Ceram.
Soc., 2006, 89(1): 274-280.
15. Bill, J. and Aldinger, F., Precursor-derived covalent ceramics. Adv. Mater.,
1995, 7: 775-787.
16. Kroke, E., Li, Y.-L., Konetschny, C., Lecomte, E., Fasel, C., and Riedel, R.,
Silazane derived ceramics and related materials. Mat. Sci. Engg.: R: Reports,
2000, 26(4-6): 197-199.
17. Riedel, R., Seher, M., and Becker, G., Sintering of amorphous polymer-derived
Si, N and C containing composite powders. J. Eur. Ceram. Soc., 1989, 5: 113-
122.
18. Riedel, R., Streker, K., and Petzow, G., In-situ polysilane-derived silicon
carbide particulates dispersed in silicon nitride composite. J. Am. Ceram. Soc.,
1989, 72(11): 2071-2077.
19. Wan, J., Gasch, M.J., and Mukherjee, A.K., Silicon carbonitride ceramics
produced by pyrolysis of polymer ceramic precursors. J. Mater. Res., 2000, 15:
1657-1660.
20. Choi, H.-J., Cho, K.-S., and Lee, J.-G., R-curve behavior of silicon-nitride-
titanium nitride composites. J. Am. Ceram. Soc., 1997, 10(10): 2681-2684.
21. Tomar, V., Analyses of
the role of
the second phase SiC particles in
microstructure
dependent
fracture
resistance
variation
of
SiC-Si
3
N
4
nanocomposites. Model. Sim. Mater. Sci. Eng., 2008, 16: 035001.
22. Tomar, V., Analyses of the role of grain boundaries in mesoscale dynamic
