Administrative Distance, Access Lists, Route Manipulation, and IP Multicast - CCIE Routing and Switching Exam Certification Guide - page 473

c.

access-list 100 deny icmp any any echo log
access-list 100 deny icmp any any echo-reply
access-list 100 deny tcp any any eq telnet
access-list 100 permit ip any any

d.

access-list 99 deny icmp any any echo log
access-list 99 deny icmp any any echo-reply
access-list 99 deny tcp any any eq telnet
access-list 99 permit ip any any

In an internetwork of 50 routers running EIGRP, you need to filter the networks received
by one spoke router. What can you use?

8

a. Use an access list and apply it to the inbound interface with the ip access-group
command.

b. Redistribute the routes into OSPF with a route map.

c. Use a distribute list under the EIGRP process with an access list to filter the
networks.

d. Change the administrative distance of the router.

Which access list permits all hosts in network 192.172.100.0/28? 9

a. access-list 100 permit 192.172.100.0 0.0.0.31.

b. access-list 10 permit 192.172.100.0 255.255.255.240.

c. access-list 10 permit 192.172.100.0 0.0.0.31.

d. access-list 10 permit ip 192.172.100.0 0.0.0.31.

What does PIM stand for? 10

a. Protocol Inbound Multicast

b. Protocol Independent Multicast

c. Protocol Independent Management

d. Password Independent Multicast