Administrative Distance, Access Lists, Route Manipulation, and IP Multicast - CCIE Routing and Switching Exam Certification Guide - page 472

When redistributing EIGRP routes into RIP, how do the bandwidth and delay metrics get
converted?

3

a. RIP assigns the bandwidth and delay metrics with the default-metric command.

b. EIGRP metrics do not get converted; RIP assigns a default hop count metric as con-
figured by the default- metric command.

c. RIP uses the bandwidth metric and discards the delay.

d. RIP uses the delay metric and discards the bandwidth.

What does the multicast address 224.0.0.2 represent?

4

a. All hosts on the subnet

b. All routers on the subnet

c. All OSPF routers on the network

d. All PIM routers on the network

When an EIGRP route is redistributed into OSPF, what is the default administrative
distance of the resulting OSPF route in the IP routing table?

5

a. 90

b. 100

c. 110

d. 170

A router is running two routing protocols: OSPF and EIGRP. Both protocols internally
learn of the route 10.1.1.4/24. Which route is added to the routing table?

6

a. The EIGRP route.

b. The OSPF route.

c. Both are added with equal load balancing.

d. Both are added with unequal load balancing.

Which access list denies Telnet and ping and permits everything else? 7

a.

access-list 99 deny tcp any any eq echo log
access-list 99 deny tcp any any telnet eq telnet
access-list 99 permit ip any any

b.

access-list 100 deny icmp any any echo log
access-list 100 deny tcp any any telnet