Biomedical Engineering Reference
In-Depth Information
44. Gislason MK, Nash DH, Nicol A, Kanellopoulos A, Bransby-Zachary M, Hems T, Condon B,
Stansfield B (2009) A three-dimensional finite element model of maximal grip loading in the
human wrist. Proc Inst Mech Eng 223(7):849-861
45. Gislason MK, Nash DH, Stansfield B (2008) In vivo contact stresses at the radiocarpal joint
using a finite element method of the complete wrist joint. J Biomech 41(Suppl 1):S147-S147
46. Gislason MK, Stansfield B, Nash DH (2010) Finite element model creation and stability
considerations of complex biological articulation: the human wrist joint. Med Eng Phys
32(5):523-531
47. Carrigan SD, Whiteside RA, Pichora DR, Small CF (2003) Development of a three-
dimensional finite element model for carpal load transmission in a static neutral posture. Ann
Biomed Eng 31(6):718-725
48. Ezquerro F, Jiménez S, Pérez A, Prado M, de Diego G, Simón A (2007) The influence of wire
positioning upon the initial stability of scaphoid fractures fixed using Kirschner wires: a finite
element study. Med Eng Phys 29(6):652-660
49. Oda M, Hashizume H, Miyake T, Inoue H, Nagayama N (2000) A stress distribution analysis
of a ceramic lunate replacement for Kienböck's disease. J Hand Surg (British Eur Vol)
25:492-498
50. Carrigan S (2002) Development of a static carpal load transmission model using finite
element method. Queen's University, Kingston
51. Cheng H-YK, Lin C-L, Lin Y-H, Chen AC-Y (2007) Biomechanical evaluation of the
modified double-plating fixation for the distal radius fracture. Clin Biomech 22(5):510-517
52. Troy KL, Grabiner MD (2007) Off-axis loads cause failure of the distal radius at lower
magnitudes than axial loads: a finite element analysis. J Biomech 40(8):1670-1675
53. Donzelli PS, Spilker RL, Ateshian GA, Mow VC (1999) Contact analysis of biphasic
transversely
isotropic
cartilage
layers
and
correlations
with
tissue
failure.
J
Biomech
32(10):1037-1047
54. Blankevoort L, Kuiper JH, Huiskes R, Grootenboer HJ (1991) Articular contact in a three-
dimensional model of the knee. J Biomech 24(11):1019-1031
55. Ledoux P, Lamblin D, Targowski R (2001) Modifications to the mechanical behavior of the
wrist after fracture of the scaphoid. Modeling by finite element analysis. Acta Orthop Belg
67(3):236-241
56. Li G, Gil J, Kanamori A, Woo SLY (1999) A validated three-dimensional computational
model of a human knee joint. J Biomech Eng 121(6):657-662
57. Li G, Sakamoto M, Chao EYS (1997) A comparison of different methods in predicting static
pressure distribution in articulating joints. J Biomech 30(6):635-638
58. Li Z, Kim JE, Davidson JS, Etheridge BS, Alonso JE, Eberhardt AW (2007) Biomechanical
response of the pubic symphysis in lateral pelvic impacts: a finite element study. J Biomech
40(12):2758-2766
59. Trabelsi O, del Palomar AP, López-villalobos JL, Ginel A, Doblaré M (2010) Experimental
characterization and constitutive modeling of the mechanical behavior of the human trachea.
Med Eng Phys 32(1):76-82
60. Swieszkowski W, Ku DN, Bersee HEN, Kurzydlowski KJ (2006) An elastic material for
cartilage replacement in an arthritic shoulder joint. Biomaterials 27(8):1534-1541
Search WWH ::
Custom Search