Biomedical Engineering Reference
In-Depth Information
23. Manal K, Lu X, Nieuwenhuis MK, Helders PJM, Buchanan TS (2002) Force transmission
through the juvenile idiopathic arthritic wrist: a novel approach using a sliding rigid body
spring model. J Biomech 35(1):125-133
24. Schuind F, Cooney WP, Linscheid RL, An KN, Chao EYS (1995) Force and pressure
transmission
through
the
normal
wrist.
A
theoretical
two-dimensional
study
in
the
posteroanterior plane. J Biomech 28(5):587-601
25. Fischli S, Sellens RW, Beek M, Pichora DR (2009) Simulation of extension, radial and ulnar
deviation of the wrist with a rigid body spring model. J Biomech 42(9):1363-1366
26. Hutton DV (2004) Fundamentals of finite element analysis. McGraw Hill: Higher Education,
New York
27. Donald BJM (2007) Pratical stress analysis with finite element. Glasnevin P, Ireland
28. Lo SH, Ling C (2000) Improvement on the 10-node tetrahedral element for three-dimensional
problems. Comput Methods Appl Mech Eng 189(3):961-974
29. Yoshimura S, Wada Y, Yagawa G (1999) Automatic mesh generation of quadrilateral
elements using intelligent local approach. Comput Methods Appl Mech Eng 179(1-2):
125-138
30. Abdul-Kadir MR, Hansen U, Klabunde R, Lucas D, Amis A (2008) Finite element modelling
of primary hip stem stability: the effect of interference fit. J Biomech 41(3):587-594
31. Anderson AE, Ellis BJ, Maas SA, Weiss JA (2010) Effects of idealized joint geometry on
finite element predictions of cartilage contact stresses in the hip. J Biomech 43(7):1351-1357
32. Janssen D, Mann KA, Verdonschot N (2008) Micro-mechanical modeling of the cement-bone
interface: the effect of friction, morphology and material properties on the micromechanical
response. J Biomech 41(15):3158-3163
33. Kayabasi O, Ekici B (2007) The effects of static, dynamic and fatigue behavior on three-
dimensional shape optimization of hip prosthesis by finite element method. Mater Des
28(8):2269-2277
34. Teoh SH, Chan WH, Thampuran R (2002) An elasto-plastic finite element model for
polyethylene wear in total hip arthroplasty. J Biomech 35(3):323-330
35. Bendjaballah MZ, Shirazi-Adl A, Zukor DJ (1997) Finite element analysis of human knee
joint in varus-valgus. Clin Biomech 12(3):139-148
36. Boyd SK, Müller R, Zernicke RF (2002) Mechanical and architectural bone adaptation in
early stage experimental osteoarthritis. J Bone Miner Res 17(4):687-694
37. Li G, Lopez O, Rubash H (2001) Variability of a three-dimensional finite element model
constructed using magnetic resonance images of a knee for joint contact stress analysis.
J Biomech Eng 123(4):341-346
38. Peña E, Calvo B, Martínez MA, Doblaré M (2006) A three-dimensional finite element
analysis of the combined behavior of ligaments and menisci in the healthy human knee joint.
J Biomech 39(9):1686-1701
39. Peña E, Calvo B, Martínez MA, Doblaré M (2007) Effect of the size and location of
osteochondral defects in degenerative arthritis. A finite element simulation. Comput Biol
Med 37(3):376-387
40. Kim S-H, Chang S-H, Jung H-J (2010) The finite element analysis of a fractured tibia applied
by composite bone plates considering contact conditions and time-varying properties of
curing tissues. Compos Struct 92(9):2109-2118
41. Varga P, Baumbach S, Pahr D, Zysset PK (2009) Validation of an anatomy specific finite
element model of Colles' fracture. J Biomech 42(11):1726-1731
42. Radev BR, Kase JA, Askew MJ, Weiner SD (2009) Potential for thermal damage to articular
cartilage by PMMA reconstruction of a bone cavity following tumor excision: a finite
element study. J Biomech 42(8):1120-1126
43. Guo X, Fan Y, Li Z-M (2009) Effects of dividing the transverse carpal ligament on the
mechanical behavior of the carpal bones under axial compressive load: a finite element study.
Med Eng Phys 31(2):188-194
Search WWH ::
Custom Search