Graphics Reference
In-Depth Information
Constructing the Tab Feature
1.
To construct the base feature, click
Home > Basic > Tab
on the ribbon.
2.
Select the XY plane.
3.
Construct the sketch, as shown.
4.
Click
Finish
.
5.
Click
OK
to construct the tab feature.
Adding a flange
1.
To add the flange, click
Home > Bend > Flange
on the ribbon.
2.
Select the edge on the top face.
3.
Set
Length
to 100.
4.
Click
OK
to add the flange.