Graphics Reference
In-Depth Information
The model in
Figure 9-20
has a severe chin
underhang
. Try to
minimize this when creating your scan. The back of the head
where the hat juts out also has a severe overhang. We used
external support material to help print the hat back. The sup-
port material did not build under the brim and chin, but it still
printed pretty well!
Figure 9-20.
Head tilted back, severe chin underhang
Slice off the jagged bits
Use the Cuts tools on the right of the screen to cut a flat bottom for the
model. Drag the Z slider so the bottom of the blue cut line is cutting off
the scan's jagged edges. Click the Execute Cut button then click Cut.
You can then click on the part of the cut model that you want to remove.
(The selected part will turn green, as shown in
Figure 9-21
).
