Information Technology Reference
In-Depth Information
10.11
To remove the hard drive, you must remove the four screws that attach it to the chassis.
•
You should see a thin, black cable running along the back side of the hard drive (that is, the side
closest to the back of MacBook Air).
Carefully loosen that cable from the plastic sheath that holds the
hard drive for easier access to the two screws on that side.
•
One of the screws on the back side of the hard drive is covered by a small piece of plastic.
You
need to lever that bit of plastic out to access the screw.
9. Remove the motherboard connector for the hard drive's interface cable, as shown in Figure 10.12.
