Geotechnical Data and Pile Design - Offshore Structures: Design, Construction and Maintenance - page 289

Chow, W.Y., Herbich, J.B., 1978. Scour around a group of piles. In: Proceedings of the 10th Annual
Offshore Technology Conference, OTC 3308, Houston, TX, pp. 2243 - 2254.
Clarke, J. (Ed.), 1993. Large-Scale Pile Tests in Clay. Thomas Telford, London.
Clausen, C.J.F., Aas, P.M., Karlsrud, K., 2005. Bearing capacity of driven piles in sand, the NGI
approach. In: Proceedings of the International Symposium on Frontiers in Offshore Geotechnics
[ISFOG 682.

Coyle, H.M., Reese, L.C., 1966. Load transfer for axially loaded piles in clay. ASCE. J. Soil. Mech.
Found Div. 92 (1052), 1 - 26.
CUR Centre for Civil Engineering Research and Codes, 2001. Bearing capacity of steel pipe piles.
CUR, Gouda, CUR-Report.
De Reister, J., 1971. Electric penetrometer for site investigations. ASCE. J. SMFE. Div. 97(SM-2),
457 - 472.
Desai, C.S., Holloway, D.M., 1972. Load-deformation analysis of deep pile foundation. In: Proceedings
of the Symposium onApplications of the Finite Element Method in Geotechnical Engineering, U.S.
Army Engineers Waterways Experiment Station, Vicksburg, Mississippi, pp. 629 - 656.
Doyle, E.H., McClelland, B., Ferguson, G.B., 1971. Wire-line vane probe for deep penetration mea-
surements of ocean sediment strength. Third Annual Offshore Technology Conference. Preprint
vol. 1, Paper No. 1327, pp. 21 - 32.
Dunnavant, T.W., Clukey, E.C., Murff, J.D., 1990. Effects of cyclic loading and pile flexibility on
axial pile capacities in clay. In: Proceedings of the Offshore Technology Conference, OTC
6374, Houston, TX.
Focht, J.A., Jr., Kraft, L.M., Jr., 1986. Axial performance and capacity of piles. In: McClelland, B.,
Reifel, M.D. (Eds.), Planning and Design of Fixed Offshore Platforms. Van Nostrand Reinhold
Company, New York.
Fugro, 1995. Final report, foundation design — Bridge piles, Jamuna Bridge, Bangladesh. Fugro
Engineers BV Confidential Report No. K-2380/120 to HDEC, June 1995.
Fugro, 2004. Axial pile capacity design method for offshore driven piles in sand. Fugro Engineers
BV Report No. P1003 to API, Issue 3, August 2004.
Gallagher, K.A., St. John, H.D., 1980. Field scale model studies of piles as anchorages for buoyant
platforms. Paper EUR 135, European Offshore Petroleum Conference, London, England.
Georgiadis, M., 1983. Development of p-y curves for layered soils. In: Proceedings of the
Conference on Geotechnical Practice in Offshore Engineering, Austin TX. ASCE,
New York, pp. 536 - 545.
Hironka, M.C., Green, W.C., 1971. A remote controlled seafloor incremental corer. Third Annual
Offshore Technology Conference, Preprint vol. 1, Paper No.1325, pp. 13 - 20.
Hvorslev, M.J., 1949. Subsurface exploration and sampling of soils for civil engineering purposes.
Waterways Experiment Station, Vicksburg, Mississippi. (Reprinted by Engineering Foundation,
New York, 1962.)
IRTP/ISSMGE International Society of Soil Mechanics and Geotechnical Engineering, 1999.
International Reference Test Procedure for the Cone Penetration Test (CPT) and the Cone Pene-
tration Test with Pore Pressure (CPTU). Report of the ISSMGE Technical Committee 16 on
Ground Property Characterisation from In-situ Testing. In: Proceedings of the Twelfth
European Conference on Soil Mechanics and Geotechnical Engineering, Proceedings of the
XIIth ECSMGE. 2195-2222. Balkema, Amsterdam.
ISO (International Organization for Standardization), 2005. ISO 22476-1 (DIS 2005), Geotechnical
Investigation and Testing — Field Testing — Electrical Cone and Piezocone Penetration Tests,
International Standard ISO 22476-1.

— 05]. A.A. Balkema, Rotterdam, pp. 677 -