Geotechnical Data and Pile Design - Offshore Structures: Design, Construction and Maintenance - page 288

API RP2A, 2007. Recommended Practice for Planning, Designing, and Constructing Fixed
Offshore Platforms, 20th ed. American Petroleum Institute, Washington, DC.
Arup, O., et al., 1986. Research on the behavior of piles as anchors for buoyant structures

Summary
report. Offshore Technology Report OTH 86 215, Department of Energy, London, England.
ASTM, 2004. Standard method of deep quasi-static cone and friction-cone penetration tests of soil.
ASTM Standard D 3441, ASTM International, West Conshohocken, PA, p. 7.
Audibert, J.M.E., Dover, A.R., 1982. Pile load test: cyclic loads and varying load rates. J. Geotech. Eng.
Div. ASCE, 108 (GT3), 501 - 505.
Bailey, E., Davis, G.L., Henderson, H.O., 1971. Design of an automatic marine corer. Third Annual
Offshore Technology Conference. Preprint vol. 1, Paper No. 1365, pp. 397 - 416.
Baldi, G., Bellotti, R., Ghionna, N., Jamiolkowski, M., Pasqualini, E., 1986. Interpretation of CPTs
and CPTUs, 2nd Part: Drained penetration of sands. In: Field Instrumentation and In-Situ Mea-
surements: Proceedings of the 4th International Geotechnical Seminar, Singapore, November
25 - 27, 1986. Nanyang Technological Institute, Singapore, pp. 143 - 156.
Bea, R.G., June 1978. Engineering fixed offshore platforms to resist earthquakes. In: Proceeding
ASCE Specialty Conference on Earthquake Engineering and Soil Dynamics, Pasadena, Califor-
nia, pp. 1357 - 1385.
Bea, R.G., 1980. Dynamic response of piles in offshore platforms. In: Proceeding of the Speciality
Conference One on Dynamic Response of Pile Foundations — Analytical Aspects, ASCE,
Geotechnical Engineering Division, October 30, 1980, pp. 80 - 109.
Bea, R.G., 1982. Soil strain rate effects on axial pile capacity. In: Proceedings of the 2nd International
Conference on Numerical Methods in Offshore Piling, Austin, TX, April 29 - 30.
Bea, R.G., 1984. Dynamic response of marine foundations. In: Proceedings of the Ocean Structural
Dynamics Symposium '84, Oregon State University, Corvallis, USA.
Bea, R.G., Audibert, J.M.E., 1979. Performance of dynamically loaded pile foundations. In: Pro-
ceedings of the Second International Conference on Behavior of Offshore Structures, BOSS
'79, Imperial College, London, England.
Bea, R.G., Litton, R.W., Nour-Omid, S., Chang, J.Y., Vaish, A.K., 1984. A specialized design and
research tool for the modeling of near-field pile-soil interactions. In: Proceedings of the Off-
shore Technology Conference, OTC 4806, Houston, TX, pp. 249

—

262.
Bea, R.G., Vahdani, S., Guttman, S.I., Meith, R.M., Paulson, S.F., 1986. Analysis of the perfor-
mance of piles in silica sands and carbonate formations. In: Proceedings of the18th Annual Off-
shore Technology Conference, OTC 5145, Houston, TX.
Begemann, H.K.S., 1965. The friction jacket cone as an aid in determining the soil profile. In: Pro-
ceedings of the 6th ICSMFE, Montreal, Quebec, vol. I, pp. 17 - 20.
Bijaker, E.W., 1980. Physical causes of scour. Paper presented at a seminar on scour held by Society
of Underwater Technology, London, England. Proceedings of a one day seminar 16 December
1980 Society for Underwater Technology London (1980).
Bogard, J.D., Matlock, H., 1990. Applications of model pile tests to axial pile design. In: Proceed-
ings of the 22nd Annual Offshore Technology Conference, OTC 6376, Houston, TX.
Bogard, J.D., Matlock, H., Audibert, J.M.E., Bamford, S.R., 1985. Three years ' experience with
model pile segment tool tests. In: Proceedings of the Offshore Technology Conference, OTC
4848, Houston, TX.
Bond, A.J., Jardine, R.J., 1995. Shaft capacity of displacement piles in a high OCR clay. Ge ó tech-
nique 45 (1), 3 - 23.
Briaud, J.L., Garland, E.E., Felio, G.Y., May 1984. Loading rate parameters for piles in clay. In:
Proceedings of the Offshore Technology Conference, Houston, TX.

-