Configuring the Software - 3D Printing: Build your Own 3D Printer and Print your own 3D Objects - page 76

Figure 4.17 Save your Repetier settings for all three tabs.
That's it! You have successfully configured the settings for the Simple 3D printer
and are ready to test the Simple and print something. In Chapter 5 , “ First Print
with the Simple ,” I show you how to put the Simple through a few basic tests to
make certain the motors are working and the hot end is reaching the correct tem-
perature to melt the PLA plastic filament that will be fed in by the extruder.