Graphics Reference
In-Depth Information
Figure 4.15 Configure settings related to the print area of your 3D printer.
On the Extruder 1 option page, change the Nozzle Diameter value to 0.4 (mm), as
shown in Figure 4.16 . Make no additional setting changes.
Figure 4.16 Configure Repetier with the nozzle diameter for your 3D printer.
You've made a handful of configuration settings on three tabs: Print Settings, Fil-
ament Settings, and Printer Settings. Before you begin using the Simple, you must
save the changes as the default settings. To do this, go back to each tab and click
the Save Current Printer Settings button. Select the Default option from the drop-
down menu for all three tabs, as shown in Figure 4.17 .
 
 
Search WWH ::




Custom Search