Biomedical Engineering Reference
In-Depth Information
Buechel, F. F., Drucker, D., Jasty, M., Jiranek, W. & Harris, W. H. (1994) Osteolysis
around uncemented acetabular components of cobalt-chrome surface replacement
hip arthroplasty. Clin Orthopaed Rel Res, 202±211.
Bunn, C. (1939) The crystal structure of long-chain normal paraffin hydrocarbons. The
`shape' of the CH
2
group. Trans Faraday Soc, 35(1), 482±491.
Carlsson, D., Chmela, S. & Lacoste, J. (1990) On the structures and yields of the first
peroxyl radicals in -irradiated polyolefins. Macromolecules, 23, 4934±4938.
Charnley, J. (1961) Arthroplasty of the hip: a new operation. Lancet, 1, 1129±1132.
Charnley, J. (1963) Tissue reactions to polytetrafluorethylene [letter]. Lancet, 2, 1379.
Charnley, J. & Cupic, Z. (1973) The nine and ten year results of the low-friction
arthroplasty of the hip. Clin Orthop, 95, 9±25.
Chmell, M. J., Poss, R., Thomas, W. H. & Sledge, C. (1996) Early failure of Hylamer
acetabular inserts due to eccentric failure. J Arthroplasty, 11, 351±353.
Collier, J., Bargmann, L., Currier, B., Mayor, M., Currier, J. & Bargmann, B. (1998) An
analysis of Hylamer and polyethylene bearings from retrieved acetabular
components. Orthopaedics, 21, 865±871.
Connelly, G., Rimnac, C., Wright, T., Hertzberg, R. & Manson, J. (1984) Fatigue crack
propagation behavior of UHMWPE. J Orthopaed Res, 2, 119±125.
Costa, L., Luda, M. P., Trossarelli, L., Brach del Prever, E. M., Crova, M. & Gallinaro, P.
(1998) Oxidation in orthopaedic UHMWPE sterilized by gamma radiation and
ethylene oxide. Biomaterials, 19, 659±668.
Costa, L., Bracco, P., del Prever, E. B., Luda, M. P. & Trossarelli, L. (2001) Analysis of
products diffused into UHMWPE prosthetic components in vivo. Biomaterials, 22,
307±315.
Counsell, A., Heasley, R., Arumulli, B. & Paul, A. (2008) A groin mass caused by metal
particle debris after hip resurfacing. Acta Orthopaedica Belgica, 74, 870±874.
Currier, B. H., Currier, J. H., Mayor, M. B., Lyford, K., Collier, J. P. & van Citters, D. W.
(2007) Evaluation of oxidation and fatigue damage of retrieved Crossfire
polyethylene acetabular cups. J Bone Joint Surg, 89, 2023±2029.
Daniel, J., Pynsent, P. & McMinn, D. (2004) Metal-on-metal resurfacing of the hip in
patients under the age of 55 years with osteoarthritis. J Bone Joint Surg, 86B, 177±
184.
Daniel, J., Ziaee, H., Salama, A., Pradhan, C. & McMinn, D. (2006) The effect of the
diameter of metal-on-metal bearings on systemic exposure to cobalt and chromium.
J Bone Joint Surg, 88B, 443±448.
Digas, G., Karrholm, J., Thanner, J. & Herberts, P. (2007) 5-year experience of highly
crosslinked polyethylene in cemented and uncemented sockets ± two randomized
studies using radiostereometric analysis. Acta Orthopaedica, 78, 746±754.
Dumbleton, J., Miller, D. & Miller, E. (1972) A simulator for load bearing joints. Wear,
20, 165±174.
Dumbleton, J., Manley, M. & Edidin, A. (2002) A literature review of the association
between wear and osteolysis in total hip arthroplasty. J Arthroplasty, 17, 649±661.
DuPlessis, T., Grobbelaar, C. & Marais, F. (1977) The improvement of polyethylene
prostheses through radiation crosslinking. Radiat Phys Chem, 9, 647±652.
Flory, P. (1953) Principles of Polymer Chemistry. Ithaca, Cornell University Press.
Geil, P., Anderson, F., Wunderlich, B. & Arakawa, T. (1964) Morphology of
polyethylene crystallized from the melt under pressure. J Polym Sci: Part A:
Polym Chem, 2, 3707±3720.
Haider, H. (2009) Tribological assessment of UHMWPE in the knee. In Kurtz, S. (Ed.)
UHMWPE Biomaterials Handbook, 2nd edn. New York, Elsevier.
