Biomedical Engineering Reference
In-Depth Information
ASTM (2006a) D2765-01 Standard test method for determination of gel content and
swell ratio of crosslinked ethylene plastics. West Conshohocken, PA, ASTM
International.
ASTM (2006b) F732-00 Standard test method for wear testing of polymeric materials
used in total joint prostheses. West Conshohocken, PA, ASTM International.
ASTM (2006c) F2102 ± 06e1 Standard guide for evaluating the extent of oxidation in
ultra-high-molecular-weight polyethylene fabricated forms intended for surgical
implants, West Conshohocken, PA, ASTM International.
ASTM (2007) F2625-07 Standard test method for measurement of enthalpy of fusion,
percent crystallinity, and melting point of UHMWPE by means of differential
scanning calorimetry. West Conshohocken, PA, ASTM International.
ASTM (2008a) E647-08 Standard test method for measurement of fatigue crack growth
rates. West Conshohocken, PA, ASTM International.
ASTM (2008b) F2183-02 Standard test method for small punch testing of UHMWPE
used in surgical implants. West Conshohoken, PA, ASTM International.
ASTM (2008c) F2214-02 Standard test method for in situ determination of network
parameters of crosslinked UHMWPE. West Conshohocken, PA, ASTM
International.
ASTM (2009) F648-07 Standard specification for UHMWPE powder and fabricated form
for surgical implants. West Conshohocken, PA, ASTM International.
Baker, D. A., Hastings, R. S. & Pruitt, L. (2000) Compression and tension fatigue
resistance of medical grade ultra high molecular weight polyethylene: the effect of
morphology, sterilization, aging and temperature. Polymer, 41, 795±808.
Baker, D. A., Bellare, A. & Pruitt, L. (2003) The effect of degree of crosslinking on the
fatigue crack initiation and propagation resistance of orthopedic-grade
polyethylene. J Biomed Mater Res, 66A, 146±154.
Bartel, D. L., Bicknell, V. L. & Wright, T. M. (1986) The effect of conformity, thickness,
and material on stresses in ultra-high molecular weight components for total joint
replacement. J Bone Joint Surg (Am), 68, 1041±51.
Bartel, D. L., Rawlinson, J. J., Burstein, A. H., Ranawat, C. S. & Flynn, W. F. (1995)
Stresses in polyethylene components of contemporary total knee replacements. Clin
Orthop Rel Res, 317, 76±82.
Bassett, D. & Turner, B. (1972) New high-pressure phase in chain-extended
crystallization of polyethylene. Nature Phys Sci, 240, 146±148.
Bassett, D. C., Block, S. & Piermarini, G. (1974) A high-pressure phase of polyethylene
and chain-extended growth. J Appl Phys, 45, 4145.
Bergmann, G., Graichen, F. & Rohlmann, A. (1993) Hip joint loading during walking and
running, measured in two patients. J Biomechanics, 26, 969±990.
Blunn, G. W., Joshi, A. B., Minns, R. J., Lidgren, L., Lilley, L., Ryd, L., Engelbrecht, E.
& Walker, P. S. (1997) Wear in retrieved condylar knee arthroplasties: a
comparison of wear in different designs of 280 retrieved condylar knee prostheses.
J Arthroplasty, 12, 281±290.
Bozic, K., Kurtz, S., Lau, E., Ong, K., Vail, T. & Berry, D. (2009) The epidemiology of
revision total hip arthroplasty in the United States. J Bone Joint Surg, 91, 128±133.
Bragdon, C. R., O'Connor, D. O., Lowenstein, J. D., Jasty, M., Biggs, S. A. & Harris, W.
H. (2001) A new pin-on-disk wear testing method for simulating wear of
polyethylene on cobalt±chrome alloy in total hip arthroplasty. J Arthroplasty, 16,
658±665.
Brooks, N., Duckett, R. & Ward, I. (1999) Effects of crystallinity and stress state on the
yield strain of polyethylene. Polymer, 40, 7367±7372.
