Graphics Reference
In-Depth Information
2.2 THE LINE COMMAND
°
°
The
Line
command is used to draw segments of straight lines.
There are many methods available to draw precise shapes using the
Line
command (which we will learn later). For now, we will type coordinates in
the
Command Window
.
On the
Ribbon
, make sure you are in the
Home
tab. Using the
Draw
panel,
click the
Line
button.
°
°
The following prompts will appear:
Specify fi rst point:
(type in the coordinate of
the fi rst point)
Specify next point or [Undo]:
(type in the
coordinate of the second point)
Specify next point or [Undo]:
(type in the
coordinate of the third point)
Specify next point or [Close/Undo]:
(type in the
coordinate of the fourth point)
°
You can use the
Undo
option at any time to undo the last specifi ed point,
hence the last specifi ed segment.
After you draw two segments, the
Close
option will be available to connect
the last point to the fi rst point and to end the command.
Other ways of ending the command include pressing [Enter] or
[Spacebar].
You can also press [Esc] to end the
Line
command.
If you are using the
Line
command and you right-click, you will get the
following menu (which is identical to the command prompt):
°
°
°
°